Commercial Sound Equipment

The Atlas Sound SHS-TB is designed for use with the SHS-6T2 strategically hidden speaker in applications with ceiling tile or material that is less than 0.5" (13mm) thick. This bridge kit ensures the diffuser can properly attach to the SHS with no gap at the ceiling tile.

The JBL CSS8004 Commercial Series ceiling speakers feature high sensitivity, providing maximum sound level, even at low tap settings.

The AtlasIED 76-8E2 8 inch Mounting Ring with is used for installing screw mount baffles for 8" loudspeakers as well as 95 series enclosures for new construction drywall applications. The unit includes mounting ears to facilitate 16" or 24" OC stud mounting.

The Atlas Sound FA720-4 4 inch Round Perforated Grille is sturdy, two piece construction features a perforated, mesh grille, welded to a formed outer ring. The grille's perforated design and narrow ring width enable it to embrace selective applications, while providing optimum speaker performance.

The Atlas Sound FA720-6 6 inch Round Perforated Grille's two-piece construction features a perforated, mesh grille, welded to a formed outer ring. The grille's perforated design with narrow ring width enables it to embrace selective applications, while providing optimum speaker performance.

The Atlas Sound FA-TR4 4 inch New Construction Ring is a Strategy Series trim ring/rough-in bracket, for wall or ceiling-mount applications. It installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish out the wall leaving the proper opening for a FA97-4 or FA95-4 enclosure.

The Atlas Sound FA-TR6 6 inch New Construction Ring is a Strategy Series FA-TR6 trim ring/rough-in bracket, for wall or ceiling-mount applications. It installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish out the wall leaving the proper opening for a FA97-6 or FA95-6 enclosure or FAPR-6 plaster ring.

The Atlas Sound FA-TR8 8 inch New Construction Ring for the Strategy Series is a trim ring/rough-in bracket, for wall or ceiling-mount applications. It installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish out the wall leaving the proper opening for a FA97-8 or FA95-8 enclosure.

The Atlas Sound FAP42-TR New Construction Ring is designed for new construction drywall ceiling applications. This unit provides a marked location for drywall installers to cut around, essentially reserving the desired location in the ceiling until final installation of loudspeaker.

The TOA PC-580RU is designed to fill the need for a high-performance, low-cost ceiling speaker for paging and notification applications.

The Atlas Sound FA95-4 4 inch Recessed Enclosure With Dog Legs are Strategy Series 4" loudspeaker enclosures that are acoustically-treated, front-loading units, equipped for installation in ceilings up to 11/4" thick.

The Atlas Sound E410NT 6.5 inch Deep No Torsion Tabs Enclosure was specially designed for new construction drywall applications with Atlas Sound model DLS4. All dimensions match model E410 with the omission of the internal torsion tabs to allow clearance for the DLS4 "dog legs".

The Atlas Sound BMT95-8 5 inch Deep Blind Mount Enclosure for 8 inch Speakers provides an easy and cost-effective alternative for secure loudspeaker installation in retrofit ceiling applications. All necessary hardware is provided including a unique support system with mounting ears.

The Atlas Sound E410 6.5 inch Deep Torsion Mount Enclosure for 4 inch Speakers are designed for use with 4" (102mm) loudspeakers and are available with conduit knockouts to accommodate varying building code and installation requirements.

The Atlas Sound E410NK 6.5 inch Deep Torsion Mount Enclosure is designed for use with Atlas Sound torsion spring grilles and standard 4" (102mm) loudspeakers. All versions are constructed of 22 gauge CRS, undercoated, equipped with torsion spring receptacles, and finished in a textured black epoxy.

The Atlas Sound FA95-6 6 inch Recessed Enclosure With Dog Legs is an economical system enclosure with less depth than the FA97-6 model. The FA95-6 is suited for installations requiring quality voice transmission, music and signal reproduction in commercial, industrial and institutional applications.

AtlasIED FA720-8 8" round perforated grille's sturdy, two-piece construction features a perforated, mesh grille, welded to a formed outer ring. The grille's perforated design with narrow ring width enables it to embrace selective applications while providing optimum speaker performance.