Commercial Sound Equipment

The Atlas Sound E410NT 6.5 inch Deep No Torsion Tabs Enclosure was specially designed for new construction drywall applications with Atlas Sound model DLS4. All dimensions match model E410 with the omission of the internal torsion tabs to allow clearance for the DLS4 "dog legs".

The AtlasIED ATPLATE-052 attenuator rack mounting plate is perfect for rack mount applications where attenuators are required. The AtlasIED ATPLATE features 2RU high #14 gauge plate pre-punched to accommodate up to 6 AtlasIED RM attenuators. (Attenuators not included).

The Lowell 25LVC volume control is a 25W autoformer attenuator (volume control) with 3dB steps, It's great for use with a 100/70/25V speaker line. It includes a 1-gang standard wall plate with a rotary knob in variety of colors and is ETL Listed.

The Williams Sound MIC 014-R plug mount microphone has no cord and features an omnidirectional condenser. It can be used with PockeTalker, DigiWave DLT transceivers or T2863 FM Transmitter.

The Atlas Sound AT100-RM Deluxe Rack Mounted Attenuator is a high-quality auto transformer that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control applications.

The Atlas Sound BMT95-8 5 inch Deep Blind Mount Enclosure for 8 inch Speakers provides an easy and cost-effective alternative for secure loudspeaker installation in retrofit ceiling applications. All necessary hardware is provided including a unique support system with mounting ears.

The Atlas Sound E410 6.5 inch Deep Torsion Mount Enclosure for 4 inch Speakers are designed for use with 4" (102mm) loudspeakers and are available with conduit knockouts to accommodate varying building code and installation requirements.

The Atlas Sound E410NK 6.5 inch Deep Torsion Mount Enclosure is designed for use with Atlas Sound torsion spring grilles and standard 4" (102mm) loudspeakers. All versions are constructed of 22 gauge CRS, undercoated, equipped with torsion spring receptacles, and finished in a textured black epoxy.

The Williams Sound TFP 036 is a power supply for the PPA T27 transmitter. Wall-style with US prongs. Cannot be used in other countries.

The Listen Tech LA-261 Lavalier Microphone is a non-directional microphone that clips onto a shirt, collar or or other articles of clothing near the neck and uses a 3.5 mm mono connector. It is ideal for use when unobtrusive placement and high performance are critical.

The Atlas Sound EZE410 4" EZ Torsion Mount Enclosure accommodates a wide selection of baffles. The EZ Mount Enclosure/Rail System transfers the composite weight of the loudspeaker, baffle, and enclosure to the ceiling's support members via adjustable support rails.

The Atlas Sound 161-4 4 inch Contemporary Wall or Ceiling Baffle is an attractive baffle ideal for most office interiors—be it recessed ceiling or recessed wall-mount installations. This model features concealed loudspeaker mounting studs and standard screw-mounting to enclosures.

The MB-25B 2 RU rack mount kit designed for use with 700 and 900 series integrated mixer/amplifiers. Easy to fit.

The Lowell 25LVC-DW Decora® volume control is a 25W autoformer attenuator for 25V and 70V distributed speaker lines. It features smooth 3 dB stepped attenuation, a single-gang Decora wall plate with a white rotary knob, and is ETL Listed for commercial applications.

The Lowell LV-5K Potentiometer Volume Control has a 5W power rating and 5000 ohm impedance for applications with a constant voltage of 25V, 70V, or 100V loudspeaker systems. Attenuation is continuous with no stops at minimum or maximum. The LV-5K includes a dial scale (0-10) and fluted black knob.

The Atlas Sound HT87 High Quality Audio Transformer offers low insertion loss (not to exceed 1.0dB) and full-range frequency response (+1dB from 60 Hz to 12 kHz). Primary taps are 1, 2, 4 and 8 watts. Secondary impedance is 4Ω and 8Ω

The Atlas Sound 95-8-7 8" recessed round enclosure with 7" deep fiberglass features extra depth for improved low-frequency performance of 8" commercial and professional loudspeakers. The increased volume extends bass response by allowing additional acoustic loading.

The Atlas Sound BMT95-4 5 inch Deep Blind Mount Enclosure for 4 inch Speakers provides an easy and cost-effective alternative for secure loudspeaker installation in retrofit ceiling applications.

The Atlas Sound EZ195-8 8 inch EZ Mount Flanged Torsion Enclosure transfers the composite weight of the loudspeaker, baffle, and enclosure to the ceiling’s support members via adjustable support rails (included).

The Atlas Sound EZ95-8 8 inch EZ Mount Recessed Enclosure is furnished with four compound combination knockouts spaced 90° apart. One perforated strap is provided on the top of the enclosure for attachment of a secondary "safety" suspension point when required.

The Audix RMT42KIT is a rackmount accessory for R42 and R62 wireless receivers. It includes a metal bracket and BNC cables for front-mounting antennas, providing a clean, secure installation in a 19" rack for enhanced audio system organization.

The Furman RS-1 provides a simple way to control AC powered equipment from one or more locations. The panel uses inexpensive low-voltage wiring and can be easily installed in a single gang switchbox with a minimum depth of 1.5”.