Commercial Sound Equipment

The Atlas Sound HPA1302 is a dual channel 1300W commercial amplifier designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads.

This Ashly Audio ne4250 four-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70 network enabled four-channel amplifier provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection.

The AtlasIED HPA1204 High Power Amplifier "HPA" Series is designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads. The HPA is compact and lightweight in comparison to other models delivering similar power levels.

The Furman F1500-UPS offers your system unparalleled battery back-up technology, created from the ground up to meet the exacting demands of the world’s most sensitive audio, video and control systems!

The nX1.52 Power Amplifier is a trust-worthy, power amplifier that installs and configure into virtually any architecture and sound environment.

The Crown CDi DriveCore 2|300BL is a 2-channel 300W/ch amp with BLU Link that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.

The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.

The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.

The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The CDi DriveCore 2|600 is a 2-channel amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.

This Ashly Audio ne4250pe four-channel networked-enabled power amplifier with Protea DSP is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

This Ashly Audio ne8250 eight-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

The Speco Technologies PL260A 260W commercial amplifier features seven front-selectable 70/25V speaker zones with selectable 70/25V switch, mic1 selectable priority paging, separate bass and treble controls, and 24V input for emergency backup power.

The Ashly nX4004 4-Channel 400W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70pe network enabled four-channel amplifier with DSP provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection and Protea NE software.

The Ashly nX8004 4-Channel 800W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Crown CDi DriveCore 2|600BL 2-channel 600W/ch with BLU Link offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more.