Commercial Sound Equipment

The Bogen Communications GDU150 is a dynamic, uni-directional gooseneck microphone that features a durable all-metal case with a non-glare black finish. It has an 18" long, fully flexible gooseneck body with an integral XLR mounting base. The GDU150 has a silent push-on/push-off talk switch. It provides outstanding speech intelligibility, feedback rejection, user sound isolation, and a low sensitivity to breath pop noise. The GDU150 has a superior shock-mount system to reject handling and noise transmission.

The Lowell SVC100-PA-DW 100 watt 70 volt mono attenuator volume control with slide easy-install volume control. A one-gang wall plate provides precise 3dB per step attenuation volume level adjustment of single or multiple speaker lines. Includes priority control relay for emergency signal bypass.

The Cambridge DSSSB-4 bridge mount provides rust-resistant steel and load-bearing support for mounting the DS1390 or DS1398 low-profile sound masking and paging speaker in a drop-tile ceiling grid.

The TOA WP-700-AM is a wall remote control panel, designed to remotely control MA-725F (or MM-700F) matrix mixer amplifiers.

The Middle Atlantic RKW Caster Kit for RK and BRK Laminate Racks has a 150 lbs capacity and adds 2.75" to the height of the rack. It is sold as a set of 4.

The Cambridge DS1357 contains a 5.25" diameter speaker mounted on axis. The compact enclosure includes a convoluted, flame-retardant, acoustical insert to further reduce standing waves and metallic resonance.

Add to Cart for Details

The TOA TS-773 Gooseneck Microphone is a designed microphone for exclusive use with the conference units of the TS-770 series Conference system.

The Atlas Sound FAP62-TR New Construction Rings provide a marked location for drywall installers to cut around, essentially reserving the desired location in the ceiling until final installation of the Atlas Sound FAP62T loudspeaker.

The Atlas Sound E408-250 is specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. It employs a ten-position, non-shorting rotary switch without stop. The attenuation rate is 1.5dB per step. (All other specifications are the same as the AT Series including the UL listing.)

The Listen Tech LA 128 is a BNC connector for the LA-113 RG-8 Coaxial Cable (screw & solder style).

An elegant environment depends on more than just décor and lighting. Sound plays a vital role as well. VXS series “M” models combine sophisticated sound and design in compact surface-mount speakers that will make a significant contribution to the most refined, elegant spaces.

The Max4G Single features a specialty microphone boom arm that rotates 270 degrees so the headset can be worn on the left or right side, and when the boom is set in the "UP" position the mic gain is automatically muted. A push-to-talk is installed inline on the headset cable for convenience.

The Listen Tech LA-207 12 VDC Replacement Power Supply is used to power the LT-800 Stationary Transmitter. This power supply has four different line cord configurations that can be selected by the user for their appropriate part of the world. The LA-207 is a 12 VDC power supply.

The Middle Atlantic U2 2RU Utility Rackshelf is made from 16-gauge steel and it is finished in a durable black powder coat.

Designed to suspend Primacoustic clouds and baffles, the SlipNot™ is a unique 76" (193 cm) suspension cable system that combines aircraft steel rope with a cam-style releasable hook for easy height adjustment at one end and a simple eye-sling at the other.

The Williams Sound MIC 054 directional Lapel Microphone features a mono microphone with a unidirectional condenser. It has a CLP 090 microphone clip and can be used with the PPA T27 transmitter, the PFM/PPA T36 transmitter, and R36 receiver.