Commercial Sound Equipment

The TOA Switchable Mic/Line Input with Mute-Send/Receive function is a balanced mic/line level input with Mute-Send and Mute-Receive functions, phantom power, and removable terminal block connector.

The Middle Atlantic DR-8 desktop rail racks offer quick and inexpensive organization. This model comes with 8 rack spaces and extends upward at a gentle slope.

Bose FreeSpace 3BF Bass Loudspeaker Rough-In Kit for flush-mount bass module, supports installation in hard deck ceilings.

The PRO 42 is a wide-range miniature condenser microphone with a hemi-cardioid polar pattern. It was designed for surface-mounted applications in high-quality sound reinforcement and other demanding sound pickup situations. Its small size is ideal for use in applications where minimum visibility is required.

Featuring a phantom-powered mute switch with a lighted “on” indicator, the AT8647QM/S shock-mount plate effectively isolates mounted microphones from impact vibration and mechanical noise normally transmitted from the surface.

The Williams Sound BAT KT6 is a 2-bay 3-volt dual drop-in charger kit with CHG 3502 and two (2) AA BAT 026-2 batteries.

The Samson CM15P is a high-quality gooseneck microphone for any podium application. The condenser element and cardioid pickup pattern provide optimum sound quality for speech and presentations.

The Atlas Sound B161-4 4 inch In-Ceiling Loudspeaker with 161-4 Baffle incorporates the popular Atlas Sound FC104 high performance loudspeaker, recognized for full-range voice and music reproduction. The B161-4 provides wide-angle sound dispersion to achieve desired coverage with fewer loudspeakers in distributed systems.

The attractive Atlas Sound BT720-4-T47 4 inch In-Ceiling Loudspeaker with T720-4 Baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The Atlas Sound IP-SA incorporates the 8" model C803A coaxial speaker and a square grille finished in white epoxy. The IP-SA is designed to be used in conjunction with an Atlas Sound IP speaker, models I8X(-CK) in applications where two speakers are required but expense is a factor.

The Switchcraft 318BT is a small, in-line wireless audio receiver that utilizes the 4.0 Bluetooth® technology to stream audio from any Bluetooth enabled device. This AudioStix® is powered by phantom power. If phantom power is not available it is equipped with a micro USB port for external power source.

The Eartec HUBMXD is a Max4G double headset that can be used with the Classic and HD UltraPAK and the HUB. This midweight headset features a fully adjustable headband and deluxe foam padding to ensure a firm, comfortable fit.

Eartec's Max4G Double features a sleek mid-weight design with deluxe padding and a fully adjustable mic boom assembly that swivels 270°. The microphone also mutes automatically when set to the up position. For theatre, film, television, and general production work you simply can't beat the performance of these affordable Pro Audio headsets.

The Max4G Double features a specialty microphone boom arm that rotates 270 degrees, and when the boom is set in the "UP" position the mic gain is automatically muted. A push-to-talk is installed inline on the headset cable for convenience.

The Monarch Headset If you require comfortable industrial headsets, look no further than the Monarch.

The TOA B-41S balanced line input module with mute-send is a line module to be used in conjunction with the 900 series and AX-1000.  It has a voice-activated muting control output and a balanced input. Transformer isolation minimizes ground loop problems when connecting remote equipment.

The TOA SC-615T provides intelligible voice paging and tone signaling for indoor and outdoor sound system applications. Fully weather-resistant for reliable operation in demanding environmental conditions.

The ST45 is a reference table stand for easiest installation and takedown of mobile sound systems.