Commercial Sound Equipment

Designed specifically for installations that may be targeted by vandals, the VP14 system from AtlasIED provides highly intelligible speech reinforcement with the added benefit of extreme ruggedness.

The attractive Atlas Sound 61-12W 12 inch Decorative Steel Baffle features concealed loudspeaker mounting studs for easy installation and a clean appearance. The 61-12W accommodates standard 12" (305 mm) loudspeakers.

The AtlasIED M1000 8" sound masking speaker assembly is designed to accurately reproduce the required spectrum of masking signal into the plenum space. With a majority of America’s workplaces having adopted an open office plan, favoring a labyrinth of cubicles over traditional closed offices, conversational privacy has become an increasingly sensitive issue. A properly designed sound masking system can significantly increase speech privacy and improve the overall work environment.

The Atlas Sound FAP62-TR New Construction Rings provide a marked location for drywall installers to cut around, essentially reserving the desired location in the ceiling until final installation of the Atlas Sound FAP62T loudspeaker.

The Atlas Sound E408-250 is specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. It employs a ten-position, non-shorting rotary switch without stop. The attenuation rate is 1.5dB per step. (All other specifications are the same as the AT Series including the UL listing.)

The Atlas Sound FA134T87 4 inch Coaxial In-Ceiling Loudspeaker Driver is a UL listed loudspeaker that handles 25-watts with smooth extended frequency response. The unit's 130° dispersion angle effectively reduces the number of loudspeakers necessary to achieve total coverage in distributed systems with low ceilings.

The Atlas Sound 164-12A 12 inch Deluxe Steel Wall or Ceiling Baffle features an attractive beveled edge baffles and a square loudspeaker cutout. A separate loudspeaker mounting plate provides for an extended bass response.

The Atlas Sound FAP82-TR new construction rings provide a marked location for drywall installers to cut around essentially reserving the desired location in the ceiling until final installation of FAP82T loudspeakers and the FAPSUB-1 subwoofers.

The Atlas Sound BT720-4 4" in-ceiling loudspeaker with T720-4 baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The Atlas Sound D161-8 8 inch In-Ceiling Loudspeaker with 161-8 Baffle is ideal for use wherever a general-purpose paging and music loudspeaker is required. Quality components are factory wired and shipped complete with dual-cone loudspeaker, dual-voltage transformer and round or square grille.

The CP700RRK Rear Rack Mount Kit provides rear mounting support of Atlas Sound's CP700 amplifier in standard 19" equipment rack. This unique mounting system will accommodate rack depths from 18.5" to 36".

The Atlas Sound VP161A-APF recessed vandal proof baffle for APF loudspeakers features security for a variety re-entrant horn loudspeakers. It is manufactured from special self-aging aluminum alloy with a tensile strength of 44,000 P.S.I.

The Atlas Sound GA-15T loudspeaker is a utility horn perfectly suited for voice paging and music transmission. Double re-entrant horn construction optimizes loudspeaker output to penetrate ambient sound levels.

The Atlas Sound HT327 High Power Transformer features high power handling with minimal insertion loss and wide frequency response to provide quality line matching of loudspeakers in high power systems.

The Atlas Sound M1000-W 8" sound masking speaker assembly is designed to accurately reproduce the required spectrum of masking signal into the plenum space. With a majority of America’s workplaces having adopted an open office plan, favoring a labyrinth of cubicles over traditional closed offices, conversational privacy has become an increasingly sensitive issue. A properly designed sound masking system can significantly increase speech privacy and improve the overall work environment.

The Atlas Sound UHT25C-U51-8 8 inch Loudspeaker for Fire Protective Signaling is an 8" diameter single voice coil loudspeakers equipped with dual (whizzer) cone and 10 oz ceramic magnet to deliver extended frequency response with high intelligibility and minimal distortion.

Atlas Sound UHT70C-U51-8 8 inch Loudspeaker for Fire Protective Signaling are 8" diameter single voice coil loudspeakers equipped with dual (whizzer) cone and 10 oz. ceramic magnet to deliver extended frequency response with high intelligibility and minimal distortion.