Commercial Sound Equipment

The Atlas Sound IP-SA incorporates the 8" model C803A coaxial speaker and a square grille finished in white epoxy. The IP-SA is designed to be used in conjunction with an Atlas Sound IP speaker, models I8X(-CK) in applications where two speakers are required but expense is a factor.

The Atlas Sound B161-4 4 inch In-Ceiling Loudspeaker with 161-4 Baffle incorporates the popular Atlas Sound FC104 high performance loudspeaker, recognized for full-range voice and music reproduction. The B161-4 provides wide-angle sound dispersion to achieve desired coverage with fewer loudspeakers in distributed systems.

The attractive Atlas Sound BT720-4-T47 4 inch In-Ceiling Loudspeaker with T720-4 Baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The Atlas Sound ZSERIES-RMK is a rack mount kit designed for mounting the Z2-B or Z4-B acoustical systems in an equipment rack. The unit takes up 4 rack units of space and allows access to the front panel controls as well as allowing the unit to tilt open for easy access to internal connections.

The Atlas Sound AWV2 2RU Wall Mount System Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 2RU mounting configuration and creates flush mounting options for equipment.

The Atlas Sound AS-120-592 is a 12-inch deep sturdy shelf with wire access that provides for convenient wall-mounting of amplifiers or electronic equipment.

The AtlasIED IP-SEST-SD is a straight surface mount enclosure is designed for use only with AtlasIED speaker system models IP-SDM, IP-SDMF, IP-SDH, and IP-SDMFLED. The unit provides an architecturally pleasing appearance with crisp lines that blend well with most building interiors.

This Attractive B Series Atlas Sound EZB161-4 4 inch In-Ceiling Loudspeaker with 161-4 Baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The Atlas Sound AWV3 3RU Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 3RU mounting configuration and creates flush mounting options for equipment.

The AtlasIED M1000R-W 8" sound masking speaker is a perfect solution for contemporary office spaces with open ceiling designs where sound masking is used to enhance speech privacy. The sleek, round design and low-gloss white finish will blend in nicely with painted ductwork.

The Atlas Sound SBMS 8 inch square beam mount speaker is ideal for "big box" retail stores whose special design calls for an open beam ceiling. The SBMS includes a 25V/70.7V internal transformer and is finished in neutral white epoxy for simplified stocking and ordering.

The M2000-SM surface mount sound masking transducer incorporates NXT Exciter Technology in a 1", coil-mounted plate, the transducer offers installation, while the transformer can be remote-mounted and adjusted with variable tap settings. The M2000-SM is designed for security masking applications where disruption of planar surfaces is required to thwart laser microphone sensors.

The Atlas Sound SHS-CUST takes the SHS from well-hidden to completely camouflaged in virtually any ceiling. Using an incredibly accurate UV-printer, AtlasIED is able to match colors and patterns so the SHS can blend into any environment.

The Atlas Sound FA730-6 6 inch Round Recessed Grille for Strategy Speakers provides a clean and hardware-free appearance. The Grille is equipped with three, welded and serrated studs for push-on installation to Strategy Series enclosures or mounting rings.

The Atlas Sound M1000-USA 8 inch sound masking speaker assembly is designed to accurately reproduce the needed spectrum of masking sound into the plenum space. The M1000-USA is designed to meet today's stringent requirements for engineer/consultant specified as well as design-build masking systems. To ensure ample low frequency response, an innovative 734 cubic inch square enclosure houses a specially designed 8" dual cone loudspeaker and high efficiency 70.7V transformer.

The Atlas Sound DT12 1x2 Drop-In Ceiling Tile Speaker combines ease of installation with superb intelligibility for speech and music reproduction. The 1' x 2' footprint allows quick installation into 2' x 2' or 2' x 4' acoustic tile ceilings.