Commercial Sound Equipment

The Atlas Sound 244-18 44RU Welded Rack is 18.5" deep and contains 44RU vertical panel spaces. The 244-18 cabinet includes one pair of 11 ga. CRS adjustable mounting rails. It is constructed of 16 ga. CRS and include base, top panel, side panels, mounting rails, and a removable rear door with cylinder lock and flush door pull handle.

The Atlas Sound AH66-8T-BSG 8 inch Stadium Horn is ideal for directional sound distribution where full range reproduction, maximum intelligibility, and high sound pressure levels are required. Applications include football stadiums, sports arenas, baseball fields, convention centers, and auditoriums.

The Atlas Sound AH99-8T-BSG 8 inch Stadium Horn's weather resistant construction includes a multiple screen configuration to prevent moisture from damaging internal components, a perforated aluminum screen covers the large horn mouth, a secondary screen is in place forward of the high frequency driver and a third tightly perforated screen.

The 2'x2' Atlas Sound CR222-NR is a 2U, 19" wide in-ceiling mounted equipment rack for with an integrated AC power pack and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The Atlas Sound IED1522LR Logic / Relay Module is a cost-effective interface module that operates as an integral part of an IED GLOBALCOM® system, as a web-enabled, programmable relay device for a wide variety of remote control and automation applications.

The 2'x2' Atlas Sound CR222 is a 2U, 19" wide in-ceiling mounted equipment rack with an integrated AC power pack and auto-sensing "on-off" that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The AtlasIED IPX Series IP-SDH indoor wall mount IP speaker with horn and display leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

AtlasIED IPX Series IP-SDM indoor wall mount IP speaker with an LCD display and talkback leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

The Atlas Sound IED1516LI is a network logic input device used to interface with an IED GLOBALCOM® announcement control system. It provides 16 optically-isolated inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.

The Atlas Sound IED1516LI-E is a 16 input expansion module that connects directly to a 1516LI to bring its total input capacity up to 32 inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.

The Atlas Sound IED1544BAS is a backup amplifier switching module capable of switching up to four (4) speaker loads from a primary power amplifier to a backup when a failure is detected.

The Atlas Sound TSD-BB22 BlueBridge DSP Audio Processor is ideal for system designs that require limited I/O’s, but require a state of the art DSP platform.

The 2'x2' Atlas Sound CR222 is a 2U, 19" wide in-ceiling mounted equipment rack for with an integrated AC power pack, auto-sensing "on-off" and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

For basic ganging rack requirements, Atlas offers the 544-25 44RU Floor Rack. The 544-25 is 22 5/16" wide, 25 1/2" deep, and has 44 vertical panel spaces. The 500 Series Cabinets are welded 16-gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges.

The AtlasIED Z2-B high definition 70V acoustical system with 2 zones at 30W each is an all-in-one solution that not only supplies high-quality speech privacy, but also delivers high-quality background music and paging.

Atlas Sound IPS-VOI indoor/outdoor vandal proof, weather resistant VoIP intercom station with call-in button leverages the VoIP communication solution to provide signaling and talkback in environments that are susceptible to damage from abuse, moisture, corrosion, dust, vibration and extreme temperature.

The AtlasIED AA240G 240W 6-input impedance mixer amplifier is engineered with many unique features to assist contractors or installers in today's commercial business audio environment. Designed for paging and background music applications.

The Atlas Sound HPA602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70V / 100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads