Commercial Sound Equipment

The Bogen MB8TSL is an all-steel surface-mounted speaker enclosure featuring an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The speakers are designed primarily for wall mounting, with front face angled downward by 12.5°.

The Bogen SPT15A is a compact, high intelligibility, 70V reentrant type loudspeakers, designed for one-way or two-way sound and communication systems, ideal for indoor and outdoor use.

The Bogen KFLDS30T is a wide dispersion, high-intelligibility, reentrant-type horn loudspeaker designed for applications where wide angle projection and directivity is a necessity.

The Bogen Communications VAR1 Voice-Activated Relay is a DPDT relay device that is activated when an audio signal is detected at the microphone preamp or at 70V, 25V, or 600-ohm line-level inputs.

The Bogen Communications CC4041 is a mixer amplifier for commercial sound applications that provides 40 watts of output power and has 4 inputs: 3 balanced MIC/Line and 1 unbalanced AUX with individual volume controls.

The Bogen Communications C35 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

Bogen's V35 Power Vector Modular Amplifier offers 35 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.

The Bogen Communications TPU35B is a wall-mounted telephone paging amplifier rated at 35 watts, that can also be rack-mounted. This TPU amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page.

The Bogen Communications C100 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

Bogen's V60 Power Vector Modular Amplifier offers 60 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.

Bogen's V100 Power Vector Modular Amplifier offers 100 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. It also includes a motorized master volume control that can be controlled using a remote volume control panel.

The Bogen Communications TPU100B is a wall-mounted telephone paging amplifier rated at 100W and can also be rack-mounted. The TPU amplifiers permit paging from telephone and/or microphone, music input through an RCA jack or screw terminals, and voice-activated, variable level, music mute with fade back after page.

Bogen's V150 Power Vector Modular Amplifier offers 150 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

Bogen's V250 Power Vector Modular Amplifier offers 250 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.