Commercial Sound Equipment

The Community R.5-V2200 dual-driver horn-loaded paging system is a complete horn/driver system designed for use in voice-range sound reinforcement and announcement/signaling applications. The R.5-V2200 provides focused, very high output sound projection, with predictable performance and exceptional long-term durability.

The TOA VX-2000DS emergency power supply unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS power supply unit. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.

The nXp 754 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The nXp 1504 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Bosch LS1-OC100E-1 Hemi-directional Loudspeaker can be used in voice alarm systems and is compliant with emergency standards. The loudspeaker has built-in protection to ensure that a fire-damaged loudspeaker does not cause failure of the connected circuit.

The AtlasIED Z4-B high definition 70V acoustical system with 4 zones at 30W each is an all-in-one solution that not only supplies high-quality speech privacy, but also delivers high-quality background music and paging.

This Ashly Audio ne4250pe four-channel networked-enabled power amplifier with Protea DSP is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

The Speco Technologies PL260A 260W commercial amplifier features seven front-selectable 70/25V speaker zones with selectable 70/25V switch, mic1 selectable priority paging, separate bass and treble controls, and 24V input for emergency backup power.

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70pe network enabled four-channel amplifier with DSP provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection and Protea NE software.

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology.

The Ashly Pema 4125.70 DSP processor features a new sleek look, 4-channel at 125 Watts per channel. The Pema is a matrix mixer with 8-in x 8-out where any input can be assigned to any output or outputs.

The Octasound SP840A 15" central speaker system can withstand an input power of 300 watts RMS. The KDM SP840A also contains a built-in, self-resetting thermal protective circuit. This protects the high frequency drivers from excessive and distorted (10% T.H.D.) input levels.

The Soundsphere Q-12A is omnidirectional loudspeaker provides a more powerful sound system where clear voice announcements and high-fidelity foreground music at high sound pressure levels are required.

This Ashly Pema 4250.70 powered digital signal processor consists of 8 inputs and 4 power amplifier outputs with the ability to assign any input to any output. This DSP paired PEMA amplifier lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming.

This Ashly Audio ne8250pe eight-channel networked-enabled power amplifier with Protea DSP is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology.

The VM-3240VA is a multifunctional amplifier comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 6-output selector. It permits not only general-purpose broadcast but also Emergency broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation.

The Crown DCi 8|300 amplifier is designed, engineered and manufactured to the industry’s highest quality standards, and provides system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology.