Commercial Sound Equipment

The SoundTube IPD-SM52-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.

The SoundTube IPD-SM52-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.

The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

The SoundTube IPD-HP82-EZ 8 inch Open Ceiling Speaker is a Dante®-addressable coaxial pendant speaker that incorporates an 8 inch (203 mm) coaxial driver with BroadBeamHP™ compression driver technology for consistently smooth high frequency. Includes hanging hardware, terminal weather boot and cover plate.

The SoundTube IPD-HP82-EZ 8 inch Open Ceiling Speaker is a Dante®-addressable coaxial pendant speaker that incorporates an 8 inch (203 mm) coaxial driver with BroadBeamHP™ compression driver technology for consistently smooth high frequency. Includes hanging hardware, terminal weather boot and cover plate.

The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.

The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. The DSP100-2-CV-D supports Dante™ audio.

The Atlas Sound HPA602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70V / 100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads

The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.

The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.

The Atlas Sound HPA1302 is a dual channel 1300W commercial amplifier designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads.

The AtlasIED DPA1202 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The nXp 752 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The nXp 1502 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The nXe 754 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The nXe 1504 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.