Commercial Sound Equipment

The AtlasIED IPX Series IP-8SCMF indoor wall mount IP speaker with display, talkback, and flasher leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The Community IC6-1062WR00 occupies a very small footprint, yet provides LF extension and output that greatly exceeds its stature thanks to a high sensitivity, long-excursion 6.5-inch woofer, and precisely engineered extended bass reflex port.

The E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio.

The RCF P4228 is an 8" weatherproof, 2-way wide-dispersion loudspeaker offering substantial power and efficiency. The cabinet full UV protected, molded in medium density polyethylene for a variety of professional indoor or outdoor applications.

The Ashly CA-1.02 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The nXe 1502 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The Lowell PA250A Power Amplifier provides 250 Watts of continuous RMS power directly to an 8 ohm speaker load. It can be used to increase the power capability of a mixer-amplifier, or it can serve as an all-in-one telephone system paging solution.

The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.

The Ashly TRA-4075 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.

The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. The Ashly nX4002 is a 2 channel multi-mode amplifier capable of driving 2 ohm loads at full power.

The Community IC6-1062WT00 is a high output 2-way 6.5" loudspeaker providing excellent acoustic performance, flexibility and elegant aesthetics for a diverse range of applications in today's performance venues.

The Ashly CA-1.52 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The TOA N-8640DS is an IP door station employing packet audio technology. It can be used in conjunction with the Multi Interface units through a network and also featuring high quality hands-free conversation.

The Ashly nX8002 2-Channel 800W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Dynacord C2800FDI DSP power amplifier offers high-quality components and truly professional processing power and performance characteristics. Their engineering and applied technologies enable exceptional sound quality with plenty of headroom. The onboard DSP includes multi-band PEQs, crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group.

The AtlasIED Learn MAGPIE2-1 complete kit is the ideal solution for smaller classrooms or boardrooms and allows you to get all the benefits of the Atlas Learn system without paying for parts or accessories that are not needed.