Commercial Sound Equipment

The JBL VMA160 is a 5-channel input, 1 60W output channel mixer/amplifier designed with convenient and flexible features to be used by commercial integrators worldwide, particularly price-sensitive emerging markets.

The RDL HD-MA35U is a 4-input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency. Two output power amplifier zones, 35W (zone 1) and 4W (zone 2), are driven from high-efficiency Class D amplifier stages.

The TOA M-900MK2 Mixer Pre-amplifier is engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation.

The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

Speco Technologies’ UL listed Contractor Series amplifiers can stand on their own to run a smaller installation, or be incorporated into a much larger job. With RMS power ranging from 30W to 120W, microphone and source-mixing ability.

With the Lab Gruppen LUCIA 120/1-70 Power Amplifier, power, limiting, control and I/O are conveniently placed where needed, offering a cost-efficient and scalable solution that often eliminates the complications and added costs of a centralized equipment room.

The JBL CSM 28 Commercial Series Mixer delivers unsurpassed quality in commercial sound, designed for everything from schools and hospitals to restaurants and fitness facilities.

The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

Bogen's V60 Power Vector Modular Amplifier offers 60 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.

The TOA BG-2060 5-channel mixer amplifier is a total redesign of the highly successful BG-1000 Series and not just for design's sake. It features a newly-engineered chassis, designed to not only look better but perform better and most of all-install easier.

Bogen's V100 Power Vector Modular Amplifier offers 100 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. It also includes a motorized master volume control that can be controlled using a remote volume control panel.

The Bose FreeSpace IZA 190-HZ integrated zone amplifier is designed to deliver premium sound, provides simplified set up and easy daily operation and offer the flexibility to expand when more loudspeakers are required.

The Lab Gruppen LUCIA 120/2 incorporates a digital front end with a 2 x 2 Mix Matrix and comprehensive DSP features.

The TOA BG-2120 5-channel mixer amplifier is a total redesign of the highly successful BG-1000 Series and not just for design's sake.

Bogen's V150 Power Vector Modular Amplifier offers 150 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

The Bosch PLE-1MA120 Plena Mixer Amplifier comes in 120W output power option. This power is directly available on 25 / 70V constant voltage connections and on a low impedance connection for a 4 ohm load.

The Lowell MA60 5 Channel Mixer Amplifier includes five channel volume controls, treble and bass controls, master volume control, main power switch, and LED display bank for output level.

The TOA M-9000M2 new integrated operating mode provides powerful functionality for both simple mixing and complex multi-zone paging applications.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The Lab.gruppen LUCIA 240/2 has been designed and engineered for quick installation and easy setup.

The Ashly Audio SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. With remote power turn-on/off and adjustable turn-on delay up to eight seconds.

The JBL VMA 1240 is a 5-channel input, 1 240W output channel mixer/amplifier designed with convenient and flexible features to be used by commercial integrators worldwide, particularly price-sensitive emerging markets.