Commercial Sound Equipment

The Rolls MX51s Mini Mix 2 is small four-channel mixer with individual volume controls, and a headphone / line output. The unit has one XLR input along with an 1/8” input and 3 sets of stereo RCA inputs.

The JBL CSA2120 provides accurate, uncolored sound with low distortion for both audio and voice applications.

The Quam MA/E8/S2/T8 is a 690 CID sound masking loudspeaker assembly consisting of an 8C10PAX - 8" O.D. dual cone loudspeaker with a 10 oz. magnet, and a 4W-70V rotary select transformer.

The Atlas Sound TSD-MIX31RL 3x1 Mic/Line Mixer includes two mic/balanced line inputs via removable Phoenix style connectors and a stereo summing dual RCA input. Switchable phantom power is provided for both mic inputs to facilitate condenser microphones.

The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.

The RDL FP-MR2 is a message repeater that permits electronic storage of a single recording up to one minute and forty seconds in duration. This message may be played back manually using an external contact closure to ground or using the front-panel START button.

The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.

The Revolabs FLX 2 conference phone is designed specifically for conference rooms, executive offices, and SoHo environments. The Revolabs FLX 2 is based on revolutionary wireless audio technology, which for years has delivered superior sound quality for audio and video conferencing to large conference rooms and boardrooms.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.

The Whirlwind Mix 6 is a six-channel, broadcast-quality analog mixer with four mic or line input channels and two stereo aux line inputs. The Mix 6 delivers the ultimate in sonic performance for the most demanding professional mic and line mixing applications.

The Bose ControlSpace CSP-428 commercial sound processor offers right-sized I/O and simplified configuration for small-to-medium scale projects, designed to serve as a stand-alone DSP in commercial applications.

The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.

The TOA A-9120DHM2 Modular Digital Matrix Mixer Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer.