Commercial Sound Equipment

The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs.

The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.

The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.

The Ashly Pema 8250 DSP Processor is a Protea-Equipped Media Amplifier. It features 8-channesl at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.

The Bose Panaray MSA12X loudspeaker advances the Bose Professional line of modular arrays with a self-powered electronically-steerable loudspeaker offering consistent audio levels with outstanding vocal intelligibility and full-range music reinforcement.

Systems built around the SWR2100P-5G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.

The Listen Tech LA-466 Dante 2-channel output XLR adapter lets you drive analog line-level products from any Dante-connected network.

The SoundTube IPD-SM52-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.

The SoundTube IPD-SM52-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.

The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The ATND8734a is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable.

Equipped with the same Dante user switch capabilities as the ATND971a boundary mic, the Audio-Technica ATND8677a desk stand allows Dante technology to be used with any phantom-powered condenser gooseneck microphone with a 3-pin XLRM-type output.

The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

Systems built around the SWR2100P-10G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.

The SoundTube STNet Hub 2 DSP amplifier gives designers and installers an IP-based option for traditional 70V/100V distributed audio systems in small to midsize applications.

This SoundTube IPD-RS62-EZ Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency.

This SoundTube IPD-RS62-EZ Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency.

The ATND933aWH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. It is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

The ATND933aWC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its low profile and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages.