Commercial Sound Equipment
Commercial Audio Products and Accessories
We carry a huge selection of commercial audio’s bestselling brands and products including, Bose Commercial, JBL Commercial, Yamaha Commercial Audio, Atlas Sound, AtlasIED, Electro-Voice Electro-Voice EV, TOA Electronics, QSC Audio, Bosch, Pure Resonance Audio, Bogen Communications, Ashly Audio, Community Loudspeakers, Biamp, Cambridge Sound Management, Soundtube, Denon Commercial, Tascam, Tannoy, Lowell, Quam, MiPro, CAD Audio, RDL Radio Design Labs, Speco, Peavey Commercial Audio, West Penn Wire and Cable and many more.
Designing a new system, upgrading or repairing your system we can help. Select from the bestselling products for your commercial audio project or system design including, PA paging horns, indoor-outdoor speakers, IP speakers, amplifiers, mixers, mixer amps, electronics, intercoms, assistive listening devices, volume controls, microphones, equipment racks, soundproofing, intercom-headsets, wiring, patch cables, mounting brackets, parts and installation accessories.
These products are made to run 24/7 365 and built to last in any challenging environment or commercial audio application. When reliability and performance are critical - such as in PA paging, background music, announcements, emergency alert, 70V audio systems, and indoor and outdoor industrial and public address systems.
Need Quantity Pricing?
We provide special discounts for contractors & installers, institutional buyers, schools, government, and military buyers on all brands, products, parts, and accessories. We accept purchase orders from schools and universities, as well as government and military organizations.
We specialize in commercial audio 70V products and system design. Get help fast, chat, email, or call our sales engineers at (888) 256-4112. Select and buy the best commercial audio brands and products for your application, needs, and budget.
Talk To An Audio Engineer
Choosing Commercial Audio Equipment
Most people feel overwhelmed when choosing audio products or systems. Don’t worry. With over 100 years of collective audio design experience, we’ve got you covered.
1. Select Commercial Product or System
Choose the bestselling product from the list below that you feel will best meet your commercial audio needs. Don’t worry, this is just a starting point.
2. Customize with a Sales Engineer
One of our Sales Engineers will guide you in finalizing a product selection that is tailored to your application and budget.
3. Purchase the Right Equipment for You
Feel confident knowing that the product or system you have purchased is designed by a qualified audio engineer and will work - exactly the way you need it.
Shop with Confidence
Our committed, experienced professional sales engineers deliver reliable designs and provide lifetime tech support for all products.
-
Crown DCi 2|300 DriveCore Install 2-Channel 2 x 300W at 70V Power Amplifier
The Crown DCi 2|300 amplifier is designed, engineered and manufactured to the industry’s highest quality standards, and provides system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.
-
Atlas Sound HPA1204 4-Channel 1200W Commercial Amplifier
The AtlasIED HPA1204 High Power Amplifier "HPA" Series is designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads. The HPA is compact and lightweight in comparison to other models delivering similar power levels.
-
Yamaha XM4180 Power Amplifier
The Yamaha XM4180 high-power multi-channel amplifier features 4-channels ideal for theater, hall, and conference room installations. -
Ecler HZA4-120F 4-Channel High-Impedance Flexi-Power Amplifier
The Ecler HZA4-120F is a powerful four-channel amplifier designed for high-impedance audio systems, offering 4 x 120 WRMS @ 100V line outputs. -
Crown CT4150 4-Channel Power Amplifier
Crown's CT4150 ComTech DriveCore is a 125W @ 8 Ohms 4-channel power amplifier that provides state-of-the-art technology for installed sound applications. -
Furman F1500-UPS Uninterruptible Power Supply 1500VA Battery Backup and Power Conditioner
The Furman F1500-UPS offers your system unparalleled battery back-up technology, created from the ground up to meet the exacting demands of the world’s most sensitive audio, video and control systems!
-
Atlas Sound DPA2402 2400W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
-
Crown CDi 2|300BL DriveCore 2-Channel 2 x 300W Power Amplifier with BLU Link
The Crown CDi DriveCore 2|300BL is a 2-channel 300W/ch amp with BLU Link that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.
-
Crest Audio CLh 5000 High Power Class D Contracting Amplifier
The Crest Audio CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output power, reliability and thermal efficiency.
-
Crown CDi 2|600 DriveCore 2-Channel 2 x 600W Power Amplifier
The CDi DriveCore 2|600 is a 2-channel amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.
-
Ashly Audio nX4002 2-Channel Multi-Mode Power Amplifier
The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. The Ashly nX4002 is a 2 channel multi-mode amplifier capable of driving 2 ohm loads at full power.
-
Ashly Audio ne4400 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 4x8 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 8 Out)
The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 8x4 Network-Enabled Audio Matrix Processor with Protea DSP (8 Input x 4 Out)
The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Speco Technologies PL260A Seven Zone Commercial Mixer Amplifier 260W 4/8/16 Ohms or 70/25V Outputs
The Speco Technologies PL260A 260W commercial amplifier features seven front-selectable 70/25V speaker zones with selectable 70/25V switch, mic1 selectable priority paging, separate bass and treble controls, and 24V input for emergency backup power.
-
Atlas Sound HPA2604 4-Channel 2600W Commercial Amplifier
The AtlasIED High Power Amplifier "HPA" Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads -
Ashly Audio nX8002 2-Channel Multi-Mode Power Amplifier
The Ashly nX8002 2-Channel 800W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Yamaha XMV4140-D 4-Channel Commercial Power Amplifier with Dante
The Yamaha XMV4140-D 4-channel 70V/4 ohm/8 ohm power amplifier with Dante for simple and fast system configuration -
Ashly Audio ne4800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Crown CDi 2|600BL DriveCore 2-Channel 2 x 600W Power Amplifier with BLU Link
The Crown CDi DriveCore 2|600BL 2-channel 600W/ch with BLU Link offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more.
-
Ashly Audio ne24.24M 12x4 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 4 Out)
This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.
-
Ashly Audio ne4250 Network-Enabled 4-Channel Power Amplifier 4 x 250W @ 4 Ohms
This Ashly Audio ne4250 four-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.
-
Crown CDi 4|300 DriveCore 4-Channel 4 x 300W Power Amplifier
The Crown CDi DriveCore 4|300 is a 4-channel amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.
-
Ashly Audio ne4250.70 Network-Enabled 4-Channel Power Amplifier 4 x 250W @ 70V
Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70 network enabled four-channel amplifier provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection.
Commercial Audio Products and Accessories
We carry a huge selection of commercial audio’s bestselling brands and products including, Bose Commercial, JBL Commercial, Yamaha Commercial Audio, Atlas Sound, AtlasIED, Electro-Voice Electro-Voice EV, TOA Electronics, QSC Audio, Bosch, Pure Resonance Audio, Bogen Communications, Ashly Audio, Community Loudspeakers, Biamp, Cambridge Sound Management, Soundtube, Denon Commercial, Tascam, Tannoy, Lowell, Quam, MiPro, CAD Audio, RDL Radio Design Labs, Speco, Peavey Commercial Audio, West Penn Wire and Cable and many more.
Designing a new system, upgrading or repairing your system we can help. Select from the bestselling products for your commercial audio project or system design including, PA paging horns, indoor-outdoor speakers, IP speakers, amplifiers, mixers, mixer amps, electronics, intercoms, assistive listening devices, volume controls, microphones, equipment racks, soundproofing, intercom-headsets, wiring, patch cables, mounting brackets, parts and installation accessories.
These products are made to run 24/7 365 and built to last in any challenging environment or commercial audio application. When reliability and performance are critical - such as in PA paging, background music, announcements, emergency alert, 70V audio systems, and indoor and outdoor industrial and public address systems.
Need Quantity Pricing?
We provide special discounts for contractors & installers, institutional buyers, schools, government, and military buyers on all brands, products, parts, and accessories. We accept purchase orders from schools and universities, as well as government and military organizations.
We specialize in commercial audio 70V products and system design. Get help fast, chat, email, or call our sales engineers at (888) 256-4112. Select and buy the best commercial audio brands and products for your application, needs, and budget.