Commercial Sound Equipment

This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

The nXe1.52 Network Power Amplifier is a trust-worthy, network power amplifier that installs and configure into virtually any architecture and sound environment.

The Ashly nX3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nX3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces.

The Crown CDi DriveCore 4|300 is a 4-channel amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.

When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.

The nXe1.52 Network Power Amplifier is a trust-worthy, network power amplifier with Protea DSP that install and configure into virtually any architecture and sound environment.

The Ashly nXe3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXe3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces.

This Ashly Audio ne8250pe eight-channel networked-enabled power amplifier with Protea DSP is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne8250.70pe network enabled eight-channel amplifier with DSP provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection and Protea NE software.

The Crown CDi DriveCore 2|1200 is a 2-channel 1200W/ch amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.

The Crown CDi DriveCore 4|300BL 4-channel 300W/ch with BLU Link offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more.

The Ashly nX1.54 Power Amplifier designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 8x16 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.

The Ashly ne24.24M 4x20 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.

When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.

The CDi DriveCore 2|1200BL is a 2-channel 1200W/ch amp with BLU Link that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.

The AtlasIED high power amplifier, "HPA" Series, is designed for use in either commercial 25V / 70V / 100V distributed systems or low impedance 8 or 4 ohm applications that require amplifiers to handle multiple impedance loads.

The Lab.gruppen C 48:4 is the third largest amplifier in the C Series family, delivering an impressive 4 × 1200W at 4 ohms. The exceptional power output plus a long list of protection and monitoring features are all packed into a 2U chassis.

The Ashly nXp3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.

The Crown CDi DriveCore 4|600 4-channel 600W/ch offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more.

The nXe1.54 Network Power Amplifier features lightweight, energy efficient Class D switching amplifier technology combined with multiple independent power supplies that provide increased performance and reliability.