- Description
Details
This two-channel IR courtroom system is the pro’s choice, offering a complete hearing assistance, language interpretation or private listening solution. Features four-channel, selectable, body-pack receivers (can be recharged when used with BAT 026-2 AA NiMH rechargeable batteries and CHG 3512 multi-bay charger—not included). This system ensures private and secure transmission to participants within the listening area. Power supplies, cables and rack mount included. Energy-efficient WIR TX9 DC emitter -- now featuring a DC power supply.
- Features
Features
- Supports additional emitter for additional coverage area
- Improved range up to 30,000 sq ft
- Adjustable volume control
- Resistant to high-efficiency lighting interference
- No radio license required
- Mic and line inputs
- 5-year warranty (90 days on accessories)
- Specification
MOD 232 Modulator Power Supply TFP 016, UL/CSA Modulation FM Wideband, +50 kHz deviation, 50 uS pre-emphasis Carrier Frequency Channel A: Selectable, 2.3/2.8/3.3/3.8 MHz, Channel B: Selectable, 2.3/2.8/3.3/3.8 MHz Signal-to-Noise Ratio More than 60dB Frequency Response 30 to 16,000 Hz, +1 dB, -3 dB, electrical response Total Harmonic Distortion Less than 2%, electrical response Audio Processing Compression(slope) adjustable from 1:1 to 4:1, Switchable compression gain: Moderate: 16dB. Max:33dB Auto Carrier Shut-Off 30-minute timer shuts off carrier when no audio is present (can be disabled) Power Switch Two-position push button, ON/OFF Power Indicator Green LED Audio Level Controls CHA and CHB Input Level, rotary knobs Audio Indicators CHA and CHB Audio Level, 10-segment LED's Carrier LEDs 4 green LED carrier “on” indicators per channel (indicates frequency, malfunctions) Compress Control 1:1 to 4:1 Input Mix LED Indicates inputs A and B audio are mixed and transmitted by CHA and CHB off Stereo LED Indicates stereo mode Phones Switch Selects CH1 or CH2 for phones when not in stereo mode Phones Output 1/4" TRS headphone jack. Accepts stereo, mono and any impedance phones Infrared Test LED IR LED for receiver testing, monitoring and audio signal testing Power Input 3-Pin Molex, 24 VAC, 50-60 Hz, 15 VA Audio Input Jack CHA and CHB combination XLR/TRS jack Line Level Balanced or unbalanced, 21 mV min. to 10V max., 212 mV nominal, 100 kΩ Color Black epoxy paint with white legends Weight 3.1 lbs (1.5 kg) Dimensions (H x W x D) 1.7" (44 mm) x 8.5" (215 mm) x 8.2" (208 mm) WIR TX9 Emitter Power Supply TFP 010, UL/CSA Power Cable NEC Class 2 wiring, two-conductor, 18 ga, 200' (61m) max. length Indicators Green LED power indicator, red LED baseband indicator Carrier Frequency 50 kHz to 8 MHz Emitter IR Power 3.5 watts Baseband Input BNC, 100 mV per carrier, 50 Ω, for use with WIR TX9 or MOD 232 only Baseband Output BNC, 50 Ω, for use with TX9 only Baseband Cable RG 58 Coax, BNC connectors, maximum 1000' (300m) length Operating Requirements 0-50º C ambient temperature, non-condensing, non-corrosive atmosphere Mounting Kits Wall or Ceiling Mount: BKT 024 Omnidirectional mount, Mic Stand Kit: SS-11 or SS-6 Color Black with white legends, red acrylic lens Weight 1.9 lbs (0.9 kg) Dimensions (H x W x D) 6.25" (159 mm) x 11.25" (286 mm) x 2.125" (54 mm) WIR RX22-4 Receiver Style Body-Pack, dual-lens detector, lanyard Color and Material Gray, shatter-proof polyallomer Lanyard 3 ft (.91 m), allows receiver to be warn around the neck Operating Temperature -10° C to +50° C Battery Type 2 x AA, alkaline (BAT 001) or NiMH (BAT 026) Battery Life Alkaline: 60 hours, NiMH: 30 hours/charge Battery Drain 25 mA, nominal Charging Contacts For use only with CHG 200 and CHG 1600 Chargers Carrier Frequency Channel 1: 2.3 MHz, Channel 2: 2.8 MHz; Channel 3: 3.3 MHz, Channel 4: 3.8 MHz De-Emphasis 50 uS FM Deviation ±50 kHz Signal-to-Noise Ratio 60dB min. Squelch Receiver squelches (mutes) at 40 dB S/N ratio Frequency Response 25 Hz to 16 KHz, +1 dB, -3 dB, electrical response Total Harmonic Distortion Less than 1%, electrical response Controls ON/OFF/VOLUME: combination thumbwheel knob; Channel Selector: four-position rotary switch Indicators Red LED "ON" indicator, flashes to indicate Low battery Audio Output Jacks 3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug Audio Output Power 15 mW max at 32 Ω Acoustic Output 110 dB SSPL90 w/ EAR 013 Sensitivity Better than 1 nW/cm2 for 40 dB signal-to-noise ratio Size 3-5/8" L x 2-3/8" W x 7/8" H (9.2 cm x 6 cm x 2.2 cm) Weight 0.27 lbs (127 g) HED 021 Style Mono, folding headphone Plug 3.5mm mono Cord 39" Driver Size 30 mm Nominal Impedance 32Ω Freq. Response 20 - 20kHz Max Power Input 100 mW Sensitivity 110 dB @ 1kHz Weight 0.114 lbs (52g) - Documents
Documents
- System Includes
System Includes
- (1) MOD 232 Modulator (with TFP 016 110VAC/24VAC Power Supply)
- (1) WIR TX9 DC Emitter (with TFP 053 U.S. DC Power Supply)
- (1) BKT 024 Wall/Ceiling Mount
- (4) WIR RX22-4 Receivers
- (4) HED 021 Headphones
- (2) NKL 001 Neckloops
- (1) RPK 005 Rack Mount Kit
- (8) BAT 001 AA Alkaline Batteries
- (1) IDP 008 ADA Wall Plaque
- Reviews
Write Your Own Review