- Description
Details
The Williams Sound IC-2 Interpreter Control Console is an audio control center for simultaneous interpretation of one or more languages. As a stand-alone unit, it allows one or two interpreters to monitor floor or relay sources, activate microphone inputs, and route the interpretation signal to one of two language groups. It is ideal for presentation-style conferences of up to 14 languages, where a floor and a single relay language are used. It can be used with Williams Sound FM, infrared and Digi-Wave transmitters for portable or fixed installations. It is also designed to meet international standards for portable interpretation consoles.
- Features
Features
- CAT 5 audio offers simplified cabling and easy cascading to support additional interpreters
- Built-in distribution amplifier and mini mixer reduce the need for external equipment and greatly simplify setup
- Floor language feed-through
- Interlocking microphone and relay output functions
- Enhanced flexibility, providing each interpreter with multiple microphone and headset options
- Five-year warranty
- Specification
Inputs/Outputs Specifications Floor In 3-pin XLR female jack, balanced (or unbalanced) input with 24k Ω differential input impedance XLR Microphone Inputs 3-pin XLR female jack, balanced (or unbalanced) input. Switchable 12VDC simplex power 3.5mm Microphone Inputs Stereo 3.5 mm TRS phone jack, pink, and stereo 3.5mm TRRS phone jack, black 3.5mm TRRS Headphone Output 3.5mm TRRS phone jack, Tip = Left, Ring 1 = Right, Ring 2 = GND, Sleeve = Mic. 3.5mm Headphone Output 3.5mm TRS phone jack, mono or stereo headphone, 8 Ω minimum Norm Out, Relay Out 3-pin XLR male jack, balanced output. Max output is +19dBu into 600 Ω balanced load impedance. Controls Volume Left and Right rotary, controls headphone volume Bass and Treble Tone Left and right rotary with center detent, controls headphone bass and treble tone levels Mute Push button, backlit red, mutes left and right mics while pressed Mic On Push button, backlit bright red, activates microphone Floor Input, Relay Input Push buttons, backlit blue, select listening language group Relay Output Push button, backlit yellow, selects microphone output language group Gain Adjust Rotary gain pots control level of microphone and Floor audio Phantom Power Slide switch enables 12VDC Simplex power to XLR microphone Norm Feedthrough Slide switch enables Floor feedthrough to Norm Out XLR jack. Relay Feedthrough Slide switch enables Floor feedthrough to Relay Out XLR jack. Ground Lift Slide switch disconnects Chassis and Audio Grounds internal to the console. Indicator Peak Level Indicator Green LED on back panel indicates optimal audio output level on Norm Out XLR when blinking Relay Output in Use Indicator Yellow LED on front panel indicates when Relay Output is in use Audio Output Frequency Response 45Hz to 20kHz, +0/-3dB re: 1kHz with flat bass/treble Distortion at 1kHz <0.5% THD @ full power Signal to Noise Ratio >82dB @ 1kHz Crosstalk Attenuation >63dB @ 1kHz Tone Controls Bass: +12dB Boost or -12dB Cut @ 100HzTreble: +12dB Boost or -12dB Cut @ 10kHz Physical Power External Power Supply, 18VDC Desktop Style Switching Inverter, 110-240VAC, 50-60Hz, 1A Dimensions (H x W x D) 10" (254 mm) x 6.35" (62 mm) x 2.45" (62 mm) Weight 3.4 lbs (1.5 kg) - Documents
Documents
- In The Box
In The Box
- (1) IC-2 Interpreter Control Console
- (1) WCA 091 25' CAT 5 Cable
- (1) TFP 044 Power Supply
- Reviews
Write Your Own Review