Commercial Audio Electronics

The Radial BT-Pro V2 is a Bluetooth-enabled direct box that connects wirelessly to smartphones, tablets, and other mobile devices and provides a pair of balanced analog audio outputs to feed a PA system. Each BT-Pro V2 has a unique identifier, allowing multiple units to be used within the same building. The latest model of the BT-Pro can also be powered via 48V phantom from a mixing console.

The RDL RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering and may be operated in mono to provide up to eight distributed mono signals.

The Bogen Communications ANS501 ambient noise sensor system is designed to monitor continuously changing ambient noise levels and electronically adjust the level of a page announcement and/or background music so intelligibility is maintained.

The Presenter from Radial combines a microphone preamp and a USB program input to create the ultimate interface for any presentation, from school lectures to corporate audio. It replaces bulky and complicated mixers and provides a simple and streamlined feature set that is as intuitive as it is powerful.

The Lowell SEQ-8 is a compact low voltage 8-step sequencer combines with low voltage remote power controls and switches to provide time delayed activation and deactivation of AC powered equipment on site or in a remote location.

Systems built around the SWR2100P-5G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.

The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.

The RDL FP-MR2 is a message repeater that permits electronic storage of a single recording up to one minute and forty seconds in duration. This message may be played back manually using an external contact closure to ground or using the front-panel START button.

The PreSonus SW5E AVB switch supplies five AVB ports with secure locking XLR Ethernet jacks. This, along with its robust construction, makes the SW5E an especially good choice for live sound systems. Network Link/Activity indicators help you ensure that network data is flowing properly.

The Stewart Audio DSP 4x4 is a versatile full featured DSP, ideal for small to medium installations where 4 channels are the right amount. It comes with a full array of DSP blocks designed to accept line or mic level (selectable phantom power). The DSP4x4 is designed to optimize the sound quality of multiple zones.

Systems built around the SWR2100P-10G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.

The DBX ZonePro 641 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications

The Atlas Sound IED0540S remote sensor is a component of the IED Ambient Analysis System. Its function is to detect the ambient sound level (desired signal level plus undesired background level) in the areas to be controlled, to convert this level and to send this information back to the 540 Ambient Analysis System.

The DynasoundPro DSLG22 sound masking amplifier is well suited for traditional 70 volt systems and smaller installations.

The AtlasIED ASP-MG2240 is a two-zone sound masking controller with integrated amplification that incorporates technologies for a professional-grade speech privacy system covering up to 7,000 square feet for applications such as conference rooms or medical offices allowing federal HIPPA standards to be met.