- Description
Details
The Atlas Sound Priority Pager Relay Controller is a two input by two output speaker level relay switcher. The AA-PPRC is designed to be placed between an amplifier's output and the speaker load. It can be used with 25V, 70.7V, 100V or low impedance systems.
Each channel can handle up to 350 watts. Placement of the relay controller is not critical because the switching of the system can be triggered from a variety of sources. Both High Level and Line Level signals can trigger the relay control circuit as well as a wide range of DC voltages.
Contact closer terminals have also been incorporated for your convenience. Relay release can also be adjusted allowing for proper paging override tuning. The AA-PPRC can be used in variety of installs such as board room applications where an audio presentation system needs to be muted so the page can be heard. The presentation system will resume when the page has been completed. It is also ideal for zone paging management for new or existing 8Ω, 25V, 70.7V, and 100V systems.
- Features
Features
- 12VDC UL Power Supply (Included)
- 2 Channel
- 350 W at 70.7V Per Channel
- Audio High Level Trigger Sense with Threshold Adjust 3V - 45V
- Audio Line Level Trigger Sense with Threshold Adjust 20mV - 2V
- Compact Size H 1.5"x W 4" x L 4.5" (H 38.1 mm x W 101.6 mm x L 114.3 mm)
- Contact Closure Trigger
- DC Trigger 5V - 24V
- Finish Black with White Lettering
- Phoenix Type I/O Connectors
- Relay Recover Adjustment 1 - 30 Seconds
- Relay Trigger Threshold Adjust
- Speaker Line Remote Switcher
- Specification
Channels 2 Circuit Design Relay Switching Load Rating Watts 350 W @ 70V (See Load Chart for other Load Ratings) Load Rating Amps 5 Amps. per channel MAX Indicators One Bi-color LED Red/Green Inputs Qty. 4 Four Position Detachable Phoenix Connectors Maximum Input Level 100V AC Outputs Qty. 1 Four Position Detachable Phoenix Connector Maximum Output Level 100V AC Trigger Inputs DC Trigger 3V-24V DC Auto Sense External Switch Trigger Contact Closure Line Level Trigger Input Min 10mV, Max 5V Speaker Level Trigger Input Min 3V, Max 100V Threshold Adjustments Specifications Line Level Trigger Threshold 10mV - 3V AC Speaker Level Trigger Threshold 3V - 45V AC Trigger Delay Adjustment 500 ms - 30 sec Frequency Response 20 Hz – 20 kHz Flat Enclosure Metal Finish Powder Coat Black with White Lettering Mounting Screw hole tabs Power Requirement 115/230V 50/60 Hz External UL Rated 12V DC Supply Power Consumption 10 mA, .3 W Dimensions (H x W x D) 1.5” (3.81 cm) x 4” (10.16 cm) x 4.5” (11.43 cm) Weight Unit 1.6 lbs - Reviews
Write Your Own Review