In normal (stereo) mode, the DA-2 provides four outputs per each of two inputs. A front panel COMBINE switch applies both inputs to all 8 outputs, where the DA-2 becomes a one or two in, eight out DA.

Each output is ground lifted and has its own level control and clip indicator light. Input signals are monitored by signal-present LEDs and clip LEDs. The headphone circuit can be switched to monitor either channel.

All audio connections are made through actively balanced line-level XLR connectors.

Where transformer isolation is necessary, the ISO-8 (a 1U 8-channel accessory) is available.

• 2- channel, line-level, audio signal distribution amplifier
• Each channel provides 4 electronically balanced XLR outputs with individual volume controls
• Can fulfill any distribution requirement, from professional disk and tape duplication to power amp input distribution
• With the impedance of the active balanced XLR inputs set at 1Meg Ohms, several units can be paralleled for virtually unlimited outputs
• Provides up to 18dB of gain allowing operation as a -10dB to +4dB converter
• Clip and signal LEDs
• Headphone monitor circuit
• Combine switch which configures the DA-2 as a 1x8 distribution amp

Manual

DA-2 Schematic and Layout