- Description
Details
RDL ST-GCA3 Gain Control Amplifier - Line Level
The ST-GCA3 constantly adjusts for changes in input levels, bringing up low levels, and reducing gain for high levels. The audio level is constantly adjusted to maintain the correct output. The AGC adjustment rate is switch-selectable. Making audio levels uniform and consistent improves the performance of nearly any type of audio system, and the ST-GCA3 SLOW mode is ideal for leveling music sources. The FAST setting of the ST-GCA3 makes it ideal for use in systems prone to loud bursts of audio, and inconsistent levels which must be constantly and quickly corrected. In paging systems, intercom systems, and mic mixing applications where intelligibility is a must the ST-GCA3 FAST mode can be the key to optimum performance.
- Features
Features
- Automatic gain control
- Wide dynamic range AGC
- Slow inaudible gain-reduction
- Tight dynamic control
- Positive, fast gain reduction
- Low-noise and low-distortion AGC
- RDL® SupplyFlex™ power input configuration
- Specification
Input +4 dBu balanced (nominal); ‑45 dBu to +20 dBu for rated output Maximum Input Level +26 dBu Outputs (2) +4 dBu, 150 Ω balanced LINE (nominal, +0/‑3 dB);‑45 dBu balanced MIC into 150Ω AGC Range > 40 dB (output level maintained within 3 dB) Frequency Response 10 Hz to 20 kHz (+/‑ 0.75 dB) No Input Signal, Output Un‑Muted < ‑70 dB No Input Signal, Output Muted < ‑80 dB Input Signal Present, Output Muted < ‑50 dB THD+N < 0.3% (50 Hz to 20 kHz; Typ. 0.05% @ 1 kHz) Mute Threshold ‑46 dB below max input; ‑28 dB below normal input Muting Response 15 sec. for 50 dB SLOW AGC Response 8 sec. for 20 dB average level adjustment FAST AGC Response 3 sec. for 20 dB average level adjustment On Delay 50 ms to ramp from muted to fully on condition Indicators (2) Indicators (2):LED, green variable intensity shows audio expansion
LED, yellow variable intensity shows audio gain reduction
Note: Both LEDs display equal intensity for normal input level (equal available expansion and gain reductionAmbient Operating Environment 0° C to 55° C Power Requirement GROUND-REFERENCED or FLOATING, 24 Vdc @ 40 mA Dimensions (H x W x D) 0.7" (17.78 mm) x 3" (76 mm) x 1.6" (40.6 mm) Shipping Dimensions (H x W x D) 2" (50.8 mm) x 2" (50.8 mm) x 4" (101.6 mm) WEEE Weight 0.145 lbs (0.0657 kg) Shipping Weight 0.2 lbs (0.091 kg) - Documents
Documents
- Reviews
Write Your Own Review