- Description
Details
The TOA SR-H2S Bass Reflex Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Slim and stylish TOA Type H Line Array Speakers ensure cost-efficient, high-quality audio for a wide venue and decor range. TOA Type H Line Array Speakers come with such sound enhancing benefits as clear sound, excellent directionality of focus on the listening area, and transmission of clear, even sound over a distance, thanks to a low degree of sound attenuation. These speakers are well-suited for medium-sized mainly speech applications where clear, uniformly dispersed sound that is audible at a distance is essential, such as conference centers, houses of worship and railway stations, or venues with highly reflective interior surfaces. The Type H consists of four models, in short or long lengths and straight or curved variations. The short models contain 9 vertically connected 7-cm (2.8") fullrange speaker units, while the taller long models come with 16 speaker units. Both lengths work to provide high quality sound even when an equalizer is not used. The speaker units come in a slim, energy-efficient and cost-effective design, with a body that is narrower than earlier versions, so they are well-suited to a wide range of venue interiors.
- Features
Features
- Sync-Drive (Synchronous Nexus Control) technology keeps the audio in phase with its sources at the speakers
- Line array configuration of speakers works to produce clear sound with reduced attenuation over distance
- Speakers are reflection-free and feedback resistant
- A unique aperture front grille structure enhances the horizontal frequency vs. beam width response for more focused horizontal dispersion
- Speakers are designed for optimally precise directivity of sound, especially vertical directivity
- Curved speaker models rely on a hyper-clothoid concept curved array that ensures improved vertical dispersion
- Selection among four models is possible, enabling more extensive customization of the listening area
- Most applications are fully covered by no-extension (one cabinet) set-ups
- Attractive and narrow 84mm (3.31") design allows speakers to fit in well with the interior decor of the venue
- Optionally available mounting brackets allow gap-free installation of speakers on a wall, for an aesthetically pleasing appearance
- Energy-efficient line array configuration requires less input power to deliver required output
- High-quality sound reproduction even when an equalizer is not used
- Fully effective operation is possible without additional amplification equipment, saving space and adding to the unit's cost effectiveness.
- A wide variety of optional mounting brackets is available, for all-mounting, rigging, and stand mounting the Type H speakers
- Removable input terminal connectors make hook-ups easier and less cumbersome
- For high-impedance operation, an optional matching transformer MT-S0301 is available
- Specification
Enclosure Bass-reflex type Power Handling Capacity Continuous Program: 180W Rated Impedance 8Ω Sensitivity 90 dB (1 W, 1 m equivalent, measured at 4 m) Frequency Response 90 - 17,000 Hz (when using an optional digital processor) Directivity Angle Horizontal: 90°, Vertical: 20° Speaker Component 7 cm (2.8") cone-type × 9 Input Connector Removable input connector Finish Enclosure: MDF, white, urethane paint; Front grille: Punched steel plate, white, acrylic paint Dimensions (H x W x D) 26.12" (663.4 mm) x 3.31" (84 mm) x 4.53" (115 mm) Weight 11.2 lbs (5.08 kg) - Reviews
Write Your Own Review