- Description
Details
The Electro-Voice EVID C8.2LP loudspeakers are a complete two-way ceiling loudspeaker in a low profile package. The package consists of a bezel assembly, grille, rear enclosure, 8" coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a wave guide coupled titanium coated dome tweeter.
The EVID C8.2LP loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2LP utilizes a transformer that offers a selection of 1.88 (70 V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70 V or 100 V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The low profile enclosure makes it easy to mount in tight spaces. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2LP ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles.
The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.- Features
Features
- 8" coaxial two-way with extended LF
- Low-profile for rich sound in tight spaces
- Ported enclosure for extended bass response
- Waveguide-coupled 1-inch titanium-coated tweeter
- Full-bandwidth overload protection
- Integrated transformer for 70V, 100V or 8Ω use
- Front-panel mode/wattage selector
- Safe, easy installation with included tile bridge and mounting ring
- White semi-gloss perforated grille
- Complete package, requires no additional accessories
- Specification
Coverage (Conical) 110° Input Formats 8Ω, 70V, 100 V Mounting Systems Integrated 3-point toggle anchors Speaker Type Ported cabinet, internally damped, two-way (passive crossover included) Frequency Response (-10 dB) 50 Hz - 20 kHz Sensitivity (SPL 1W/1m) 91 dB Max Calculated SPL 110 dB Cont. / 116 dB Peak Impedance 8 Ohms nominal (transformer bypass) Network Network and transducers protected, 12 dB/oct 2.6 kHz System Power Handling
(Continuous/Program/Peak)100 W Overload Protected LF Transducer 8" (200 mm) polypropylene cone HF Transducer 1" (25 mm) Ti Mylar Laminate Connectors Phoenix type removable, with screw terminals and "loop-thru", accepts 12 ga wire Safety Agency Ratings UL 1480, safe for use in air handling spaces per UL 2043. Grill Powder-coated steel with safety tether Enclosure Material Steel enclosure and UL94V-0 rated baffle and bezel Transformer Taps 70V 1.88, 3.75, 7.5, 15 or 30W 100V 3.75, 7.5, 15 or 30W Bypass 8 Ohms Dimensions Chassis Size 8" (203.2 mm) Diameter (Max) 10.63" (270 mm) Height 7.01" (178 mm) Weight 11.02 lbs (5 kg) Shipping Weight (Pair) 24 lbs (11 kg) - Documents
Documents
- Reviews
Write Your Own Review