- Description
Details
The Electro-Voice EVID C8.2HC is an 8" coaxial transducer featuring an innovative waveguide (patent pending) that provides directivity control to 1 kHz. It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. Its 75° coverage pattern provides the same coverage area when used in a 21’ ceiling as a typical flush mount mounted unit in an 8’ ceiling. This loudspeaker system is a complete two-way ceiling loudspeaker package.
The package consists of a bezel/waveguide assembly, grille, rear enclosure, 8" coax two-way loudspeaker with waveguide coupled titanium coated dome tweeter and internal line-matching transformer. The C8.2HC utilizes a transformer that offers a selection of 7.5 (70 V only), 15, 30 or 60 watts delivered to the loudspeaker system using either 70 V or 100 V lines, or 8 ohm bypass. Selection is via a convenient switch on the front of the waveguide. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure, with fiberglass damping material, provides an optimum internal volume for extended low frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2HC ceiling system in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles.
The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide controlled dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.- Features
Features
- Maximum fidelity and intelligibility for high ceilings
- Ported enclosure for extended bass response
- Waveguide-coupled 1-inch titanium-coated tweeter
- Full-bandwidth overload protection
- Integrated transformer for 70 , 100V, or 8 Ω use
- Front-panel mode/wattage selector
- Safe, easy installation with included tile bridge and mounting ring
- White semi-gloss perforated grille
- Complete package, requires no additional accessories
- Specification
Frequency Response (-10 dB) 50 Hz - 20 kHz Coverage (Nominal -6 dB) 75° nominal above 1 kHz Power Handling 75 W Cont. / 300 W Peak Sensitivity (SPL 1W/1m) 93 dB Maximum Calculated SPL 112 dB Cont. / 118 dB Peak Impedance 8 Ohms nominal (transformer bypass) Network Network and transducers protected, 12 dB/oct 2.6 kHz LF Transducer 8" (200 mm) Polypropylene cone in waveguide HF Transducer 1" (25 mm) Ti Mylar laminate Connectors Phoenix type removable, with screw terminals and "loop-thru", accepts 12 ga wire Grille Perforated powder coated steel with safety tether Cutout Size 12.75" (324 mm) Enclosure Material Baffle UL 94V-O rated ABS Backcan Zinc plated steel Transformer Taps (Transformer Version Only) Bypass 8 Ohms 70V 15, 30 or 60W 100V 7.5, 15, 30 or 60W Dimensions (H x Diameter) 11.9" (303 mm) x 12.6" (320 mm) Weight 13.2 lbs (6 kg) - Reviews
Write Your Own Review