- Description
Details
The AtlasIED IPS-SIS indoor wall mount SIP strobe leverages the VoIP communication solution to enhance critical alert messages with visible signaling in environments that require visual notification to overcome high ambient noise levels or large spaces.
The AtlasIED IPS-SIS registers as a communication endpoint directly to a SIP based communication system to provide visual signaling while leveraging the WAN/LAN network architecture.
When receiving a SIP call or audio via a configured multicast RTP stream, the IPS-SIS becomes active and blinks. When the audio broadcast is complete, the IPS-SIS stops blinking.
When used within a Cisco Environment, these same SIP strobes from AtlasIED can join Cisco's Unified Survivable Remote Site Telephony (SRST) as supported devices within SRST endpoint architecture. Cisco's SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability to extend LAN communication between any combination of phones and speakers with visual notifications is particularly critical during an emergency, which may be the actual cause of the WAN outage.
Ideal for Corporate Applications, Education Institutions, Entertainment Complexes, Industrial Facilities, Government Buildings, Healthcare Facilities, Houses of Worship, Transportation Hubs; anywhere the need for critical alerts/public address exists and a single enterprise-class communications platform is preferred.
- Features
Features
- Meets ADA requirements for telephony signaling and notification
- SIP activation
- Multicast activation
- Cisco SRST support
- 5 user blink scenes available
- User configurable brightness
- Event-controlled relay
- Program or listen to up to 10 multicast addresses
- Web-based setup
- PoE powered
- Specification
Dimensions (H x W x D) 4.5" (115 mm) x 2.1" (55 mm) x 4.5" (115 mm) Weight 1.0 lbs (0.45 kg) Shipping Weight 2.0 lbs (0.90 kg) - Documents
Documents
- In The Box
In The Box
- (1) IPS-SIS SIP Enabled Wall Mount Strobe
- (4) #6-32 x 5/8 Phillips Flat Head Screws
- (4) #6 x 1 1/4 PH-PN SMS ZP
- (4) #6 Plastic Wall Anchors
- Reviews
Write Your Own Review