- Description
Details
The Control 18C/T is a full-range ceiling speaker consisting of a 8" (200 mm) high tech cone driver and a 25 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation. The speaker is designed to provide excellent sound quality for a wide variety of medium to high volume applications such as music cafes, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, convention centers, hotels, educational facilities, and more.
The speaker delivers consistent sound quality for listeners located both off and on axis. The high technology 200 mm (8.0 in) low-frequency driver is designed with a lightweight, high temperature anodized aluminum voice coil former and high temperature grade voice coil for stable performance and reliability under long-term high power working conditions. The butyl rubber surround provides long-term durability and excellent sonic damping while the polypropylene cone is water and humidity resistant. The FEA-optimized motor construction and cone geometry, along with linear suspension spider design, allow for a smooth frequency response and more consistent off-axis performance. The 25 mm (1.0 in) high frequency driver features a highly damped treated silk dome for clear and warm sound, a lightweight Kapton™ voice coil for better high frequency response and excellent reliability, low viscosity liquid cooling for power handling and reliability, and a wide dispersion waveguide design to produce wide coverage and smooth frequency response.
The removable locking connector has screw terminals for secure wire termination and “loop through” terminals. A dual strain relief assembly provides clamping for use with cable or flex conduit. Ideal for a wide variety of projects, the Control 18C/T is switchable for use as either an 8 ohm low-impedance speaker or as part of a 70V or 100V distributed loudspeaker system with a 60 Watt multitap transformer. The speaker comes complete with two tile rail supports, one C-ring support backing plate, cutout template, paint shield and grille. A safety seismic attachment ring is provided on the top surface. Available in white or black (-BK).- Features
Features
- 8" (200 mm) high output driver with polypropylene cone and butyl rubber surround
- 1" (25 mm) soft-dome liquid-cooled tweeter
- Blind-mount backcan for quick and easy installation
- Dual conduit/cable clamps
- Combined 70V/100V and low impedance direct operation
- 90 Watts at 8Ω nominal setting
- 60W multi-tap at 70V/100V
- 58 Hz – 20 kHz bandwidth with 90° coverage
- High 92 dB sensitivity for high maximum SPL
- White or black (-BK)
- Specification
Frequency Range (-10 dB) 58 Hz – 20 kHz Frequency Response (±3 dB) 80 Hz – 16 kHz Power Capacity (at low-Z) 180 Watts Continuous Program Power Maxium Input Voltage 31.8 V RMS (2hrs), 63.6 V peak Nominal Sensitivity 92 dB Nominal Coverage Angle 90° Conical Coverage Directivity Factor (Q) 6.0 Directivity Index (DI) 7.8 dB Rated Maximum SPL 112 dB @ 1 m (3.3 ft) average, 118 dB peak Nominal Impedance 8 Ohms (In Direct/Bypass 8Ω Setting) Transformer Taps 60W, 30W, 15W @ 70V or 100V (plus 7.5W @ 70V only) Crossover Network 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver LF Driver 8" (200 mm) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil HF Driver 1" (25 mm), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide Input Connector Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm) Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism Materials ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan Safety Agency UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems Ceiling Cutout Size Circular cutout with 11.1" (282 mm) diameter (cardboard cutout template included) Ceiling Thickness Range Up to 1.5" (38 mm) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 2.4" (60 mm) ceiling thicknesses Safety Seismic Attachment One Point, Top Surface Dimensions (Dia x D) 12.1" (307 mm) x 10.8" (282 mm) Net Weight (ea) 14.1 lbs (6.4 kg) Shipping Weight (pair) 39 lbs (17.7 kg) - In The Box
In The Box
- C-Ring Support Backing Plate
- (2) Tile Support Rails
- Cutout Template
- Paint Shield
- Removable Locking Multi-Pin Connector
- Grille with Safety Tether
- Reviews
Write Your Own Review