- Description
Details
Open Box. NEW Condition. Authorized Lowell Dealer. Documentation and Packaging as new product.
Lowell ES-4T 4" In-Ceiling Speaker
The ES-4T 4 inch in-ceiling speaker is a self-contained, recessed, in-ceiling speaker system with a 4" dual cone, full range driver has a high-frequency whizzer cone to provide the kind of crisp, high frequency response that would typically only be produced by a coaxial speaker design. The ported enclosure is tuned for extended low frequency response. And the speaker's wide dispersion can actually reduce the number of speakers required to produce even coverage in distributed speaker systems. Built-in reversible mounting dogs aid fast installation, while allowing the speaker to be mounted in drywall, wood, tile or almost any type of ceiling with thickness up to 2.25" (57mm). Includes C-ring, support rails, press-fit grille with scrim, grille pull tool, template to assist in cutting holes, plastic paint shield.
- Features
Features
- 4" dual cone, full range driver
- Low-profile front baffle formed from UV-rated high-impact plastic
- Durable 20-ga. zinc-plated steel enclosure
- Built-in reversible mounting dogs for fast installation
- Mount in drywall, wood, tile, or almost any type of ceiling with thickness up to 2.25" (57 mm)
- Ported enclosure tuned for extended bass response
- Tap selector switch mounted behind grille for internal 16W transformer
- Tap selections for 25V, 70V or 100V speaker systems and 8 ohm transformer bypass position
- Removable (four-pin) Phoenix-style connector with two terminals for input to speaker, and two parallel terminals
- Mounting C-ring and two support rails prevent sagging when installed in lay-in tile ceilings
- White, press-fit, fine-mesh grille with scrim
- Grille pull tool
- Template to assist in cutting mounting holes
- Plastic shield to protect speaker when painting
- Specification
Power Handling 25W RMS (at 8 ohms) measured per EIA Standard RS-426B Sensitivity 85.7 dB log average SPL (at 8 ohms) @1W/1M over the frequency response range Maximum SPL 99.7 dB (calculated based on power rating and measured 8 ohm sensitivity) Impedance 8 ohms (nominal), 7.3 ohms @ 342 Hz (minimum) Frequency Response 108Hz – 20kHZ ± 6dB Dispersion Angle 135˚ conical @ 2kHz octave (-6dB) Transformer Taps 100V (16, 8, 4, 2W); 70V (16, 8, 4, 2, 1W); 25V (2, 1, .5, .25, .13W) Speaker Cone Specially formulated polypropylene Whizzer Cone PEI Surround Rubber Magnet Weight 7.35 oz. (208.4g) Voice Coil diameter 0.8” (20.38 mm) Input Terminals 4-conductor removable Phoenix style connector Net Weight 4.1 lbs (1.9 kg) - In The Box
In The Box
- 4" dual cone full range driver
- Transformer
- Enclosure
- Baffle
- Fine-mesh grille with scrim and pull tool
- Support rails
- C-ring
- Plastic paint shield
- Paper template to assist cutting mounting holes
- Reviews
Write Your Own Review