70 Volt Outdoor Speakers

The SoundTube RS62-EZ 6.5" weather-resistant speaker offers attractive styling in an economical speaker for open-ceiling uses. It has one 6.5" (165 mm) coaxial driver with BroadBeam Ring technology for consistently smooth high-frequency sound and 16 Ohm impedance for easy daisy-chaining in low voltage systems.

Learn More

The Bose FS2SE surface mount speaker for indoor and outdoor applications features a full-range 2.25" cone transducer, low frequency range down to 85 Hz, 16-ohm and 70/100V operation. Audio connections are terminated with a detachable Euroblock connector, and the FS2SE is iP55 rated for outdoor installation.

Learn More

The SoundTube RS31-EZ-T is a premium full-range 3" pendant mount weather-resistant speaker, with a polypropylene driver and butyl rubber surround and includes a 20W transformer.

Learn More

The SoundTube SM400i is a 4" coaxial, ported speaker with a low-profile surface mount enclosure design for indoor/outdoor applications that delivers a consistent dispersion pattern (2 to 10 kHz, independently verified). Mounting hardware is included and features a corrosion- and theft-resistant Stealth™ U-bracket for easy and secure installation.

Learn More

The Apart Audio MASK4CT 4.25" speaker has a unique design and delivers a crystal-clear sound for all music applications. Can be used as a 70V/100V speaker with power tapping on 20 - 10 - 5 - 2.5 watts in 100V or as a low impedance 16 ohm speaker. Learn More

The Tannoy OCV 6 is a 240-Watt high sensitivity pendant loudspeaker that delivers wide and consistent broadband directivity with enhanced intelligibility – plus the linear response of our legendary studio monitors.

Learn More

The Tannoy OCV 8 is a 280-Watt high sensitivity pendant loudspeaker that delivers wide and consistent broadband directivity with enhanced intelligibility – plus the linear response of our legendary studio monitors.

Learn More

The SoundTube SM590I-II speaker includes a higher power output for long throw and high SPL requirements as well as one 5.25" polypropylene woofer and one 1" tractrix horn-loaded, convex aluminum dome tweeter in a ported enclosure.

Learn More

The SoundTube SM590i-II-WX 5.25" high power surface mount speaker has a high-power output for long throw and high SPL requirements. It has one 5.25" polypropylene woofer and one 1" horn-loaded convex titanium dome tweeter mounted to a proprietary cast-aluminum baffle and heat sink.

Learn More

The SoundTube SM82-EZ-II-WX-BK 8" 2-way extreme weather outdoor surface mount speaker is a cost-effective, high-efficiency loudspeaker for distributed applications or 8 ohm applications, featuring Weather Guard qualities that are built directly into the speaker.

Learn More

Environment-resistant SM Series speaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and 1" exit high frequency compression driver. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director. Learn More

The SoundTube SM590i-II-WX utilizes a dual layer hydrophobic material inside the speaker grille and an aluminum grille with powder-coat finish to keep water from the drivers and internal electronics in even the most extreme weather conditions.

Learn More

The Apart Audio MASK6CT has a unique design and delivers a crystal-clear sound for all your public address and background music applications. Can be used as a 70V/100V speaker with power tapping on 60 - 30 - 15 - 6 watts in 100V or as a low impedance 16 Ohm speaker. Learn More

The QSC AD-S402T is a 4-driver column surface-mount loudspeaker. This premium full-range system is capable of 70V / 100V or 8 Ohm bypass loads, making it ideal for a wide variety of foreground and background applications with acoustically challenged environments.

Learn More

The Bose DesignMax DM3SE 25W loudspeaker features a two-way 3.25" woofer and ¾-inch tweeter coaxially mounted within the Dispersion Alignment system, producing a frequency range of 70 Hz - 20 kHz.

Learn More

The Tannoy AMS 5ICT LS is a full bandwidth 200-Watt high sensitivity loudspeaker that utilizes our all-new proprietary 5" ICT (Inductive Coupling Technology) point source driver to deliver consistent broadband directivity and provide exceptional long-term reliability.

Learn More

The JBL Control 25AV-LS is an especially wide band-width, smooth response speaker. It features a top quality 70V/100V transformer for distribution systems. The control is UL1480 UUMW listed for use in fire alarm or emergency communication systems. Learn More

Designed for a wide variety of discrete small scale sound reinforcement applications, the Tannoy DVS 8 is an ultra-compact surface mount loudspeaker of exceptional value and acoustic performance. A full bandwidth loudspeaker designed for commercial, professional and residential applications where environmental durability and high-quality sound reproduction are required.

Learn More

The SoundTube SM890i-WX is an 8" Surface Mount Speaker with Weather Guard featuring patented BroadBeamHP waveguide technology that delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage. It has one 8" treated fiber driver with an offset 1.42" compression horn configuration.

Learn More

The Tannoy AMS 6ICT LS is a full bandwidth 240-Watt high sensitivity loudspeaker that utilizes our all-new proprietary 6" ICT (Inductive Coupling Technology) point source driver to deliver consistent broadband directivity and provide exceptional long-term reliability.

Learn More

The Bose DesignMax DM5SE 50W loudspeaker features a two-way 5.25" woofer and 1" tweeter coaxially mounted within the Dispersion Alignment system, producing a frequency range of 60 Hz - 20 kHz.

Learn More

The Bose DesignMax DM6SE 125W loudspeaker features a two-way 6.5" woofer and 1.25" tweeter coaxially mounted within the Dispersion Alignment system, producing a frequency range of 55 Hz - 20 kHz.

Learn More