Commercial Microphones

The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. There is no voltage on the mic output terminals. Therefore, the ST-MPA24 can convert any existing mic input into a phantom powered input.

The TOA ST-800 Microphone Stand is a desk-top microphone stand base designed for use with a gooseneck condenser microphone. It features compact and stable design.

The Astatic 119S-19 is a dynamic cardioid microphone with a momentary push button switch, designed especially for gooseneck mounting in quality sound reinforcement and communication installations.

The Audix ATS10 is a heavy duty shock absorbent table stand with latching on/off switch and XLR connector.

An integrated switchable light-ring shows the status of the microphone at a glance.

A special light-ring expander comes with every DAM+ gooseneck module to improve the visibility of the LED ring if necessary.

The ST6 is compatible with a wide range of microphones, e.g. the gooseneck microphones of the DAC, DAM and DAM+ series

The Astatic 878HL-2 is designed for fixed or temporary paging applications and allows for a gentle rise in the high midrange frequency response for speech intelligibility.

The Samson CMB1 is a weighted gooseneck microphone base with a female XLR connector that is compatible with the Samson CM15 and CM20 miniature gooseneck condenser microphones.

The ATUC-M43H gooseneck microphone is a hypercardioid condenser element with doublelayer pop filter, a remotecontrolled LED ring, 3-pin XLRM-type connector with rubber cap to prevent mechanical vibration, and RFI-shielding technology.

The Whirlwind Micmute PT mic switcher offers passive switching solutions for controlling the on and off conditions of a microphone or balanced line signal via footswitch.

Designed to plug directly into a panel- or desk-mounted XLRF-type connector, the U859QL features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns.

The Astatic AMC105-2-19 gooseneck microphone is a dual zone omnidirectional microphone designed especially for fixed or gooseneck mounting in quality sound installations. A smooth, wide band frequency response with a slight intentional "presence" boost at 2000 Hz gives a "natural", crisp, highly intelligible sound.

The Audio-Technica ATUC-M58H gooseneck microphone is a hypercardioid condenser element with double layer pop filter, a remote-controlled LED ring, 3-pin XLRM-type connector with rubber cap to prevent mechanical vibration, and RFI-shielding technology.

The Audio-Technica ATUC-M32L is a fixed-charge, line cardioid condenser gooseneck microphone; 320.0 mm (12.60") long, 10.0 mm (0.39") head diameter. Double-layer pop filter, remote-controlled LED ring, 3-pin XLRM-type connector, and RFI-shielding technology.