- Description
Details
The 18.94" version of the U857Q, the U857QL cardioid condenser quick-mount gooseneck microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. It features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
- Features
Features
- Designed for high-quality sound reinforcement, professional recording and broadcasting
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no “memory” permits quick positioning into desired shape
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Self-contained electronics eliminate need for external power module
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
- Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
- Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
- Specification
Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Cardioid Frequency Response 30-20,000 Hz Low Frequency Roll-Off 80 Hz, 18 dB/octave Open Circuit Sensitivity –39 dB (11.2 mV) re 1V at 1 Pa Impedance 250 ohms Maximum Input Sound Level 139 dB SPL, 1 kHz at 1% T.H.D. Phantom Power Requirements 11-52V DC, 2 mA typical Dynamic Range (Typical) 115 dB, 1 kHz at Max SPL Signal-To-Noise Ratio 70 dB, 1 kHz at 1 Pa Switch Flat, roll-off Output Connector Integral 3-pin XLRM-type Dimensions 18.94" (481 mm) long
0.48" (12.2 mm) head diameter
0.74" (18.9 mm) base diameterWeight 0.33 lbs (0.15 kg) - Documents
Documents
- Reviews
Write Your Own Review