Commercial Microphone Accessories

The THS 3 has both main and talkback microphone outputs. A latching Mic On/Off switch connects signal to the main mic output. The switch is illuminated red when the mic output is live. 36 Volt...

The THS 2 Talkback/Headphone box has a single microphone output, controlled by a latching Mic On/Off switch and a momentary Cough switch. The microphone output is a passive, straight through...

If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input...

This 33 oz. (940g) base keeps the microphone firmly in the desired location. The LED indicator allows the speaker to know if the mic is on or off. The on/off switch is completely silent. The...

The TOA ST-800 Microphone Stand is a desk-top microphone stand base designed for use with a gooseneck condenser microphone. It features compact and stable design. This stand must be used with the...

The Sennheiser MZFS 60 Floor Stand can be combined with the MZH goosenecks and ME microphone heads, and converted to wireless operation using an SKP 3000 or SKP 500 plug-on transmitter. The 60 cm...

The MZH 3042 is a metal gooseneck with two flexible sections for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling...

The MZH 3040 single flex gooseneck stand with 3 Pin XLR connector is a metal gooseneck for use with the ME 34, ME 35 and ME 36 condenser microphone heads. This rugged, matt black gooseneck (Ø 6 mm)...

The MZH 3015 is a metal gooseneck for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be...

The MZH3015 Single Flex Gooseneck with 3 Pin XLR Connector is a metal goosenecks for use with the ME 34, ME 35 and ME 36 condenser microphone heads. This rugged, matt black gooseneck (Ø 6 mm) has a...

The SMT1218R shock mount adapter for ADX12 and ADX18 gooseneck microphones is an optional rubber insulated shock mount. It requires permanent installation with a drilled hole of 2" in diameter. The...

The locking metal windscreen reduces unwanted breath and wind noise. It is designed for use with Shure Microflex gooseneck microphones. It is available in black.

Featuring a phantom-powered mute switch with a lighted “on” indicator, the AT8647QM/S shock-mount plate effectively isolates mounted microphones from impact vibration and mechanical noise normally...

Audio-Technica AT8646QM Shock Mount Microphone Plate The AT8646QM shock-mount plate effectively isolates mounted microphones from impact vibration and mechanical noise normally transmitted from the...

The GN-19 19" Flexible Gooseneck attaches to any microphone stand or adapter with 5/8"– 27 male and female threads. Inside, the diameter is 0.338". It comes in both an ebony and chrome finish.

The GN-13 13 inch Flexible Gooseneck attaches to any microphone stand or adapter with 5/8"– 27 male and female threads. The inside diameter is 0.338". It comes in both an ebony and chrome finish.

The AT8615RS desk stand features an internal electronic mute circuit designed to work with phantom-powered microphones. A rugged mechanical on/off switch providing push-on/push-off operation...