Commercial Sound Accessories
-
TOA M-11S Microphone Input with Mute-Receive
TOA M-11S is for balanced, low impedance mics. Responds to mute bus activation, normally-on or normally-off. -
Tannoy CMS 503 PI BACKCAN for CMS 503 PI Series Ceiling Loudspeakers (Pre-Install)
The Tannoy CMS 503 PI back can is a low profile acoustically enhanced zinc plated steel back can for CMS 503 PI series ceiling speakers. The back can is designed for pre-installation in newly constructed non-suspended ceilings.
-
Atlas Sound WTSD-XLR4 4-Input XLR Wall Plate for WTSD-MIX41K
The Atlas Sound WTSD-XLR4 is a wall plate featuring four female XLR connectors. The WTSD-XLR4 is designed to be used in installations featuring the WTSD-MIX41K wall plate mixer.
List $137.99Price $112.99Savings $25.00 (18%) -
Lowell CS650-DW Program Selector Switch with Volume Control 70V or 25V - 50W
The Lowell CS650-DW program selector switch with volume control is a combination volume control / selector switch for controlling the speaker volume on up to six source connections.
List $134.12Price $121.56 -
Atlas Sound WTSD-PWHUB WTSD Audio Power and Control Interface
The Atlas Sound WTSD-PWHUB is designed to be used in conjunction with AtlasIED WTSD wall plate mixers at the head-end (amp rack) in place of the WTSD-PWBOB when additional headroom control and external device integration is necessary.
List $153.99Price $123.99Savings $30.00 (19%) -
RDL DB-CIJ3D Mono Consumer Input Jacks
The DB-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line-level audio sources to feed a mono balanced (or unbalanced) audio line.
List $169.11Price $126.84Savings $42.27 (25%) -
Ashly Audio WR-1 Dual-Level Decora Wall Remote Volume Control with Euroblock Terminal
The Ashly WR-1 is an assignable, dual potentiometer remote volume control for the controlled product. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock connector labeled "0 - 5 Volt Remote Level Control".
List $149.00Price $129.00Savings $20.00 (13%) -
Ashly Audio WR-1.5 Volume Control and Source Preset Select
The Ashly WR-1.5 volume control fits in standard wall boxes and used low gauge wire for hook-up. It has a single potentiometer for remote level control, plus a 4-position rotary switch for preset recall. The remote level control uses DC voltage provided by the host unit to attenuate one channel of that unit.
List $199.00Price $149.00Savings $50.00 (25%) -
Audio Enhancement WPA-03 Wall Plate Remote for CA-30 Amplifier
The Audio Enhancement WPA-03 Wall Plate expands the features of the CA-30 Amplifier. It provides an audio input that the teacher can use with any multi-media device (i.e. IPod™, Laptop Computer, etc.).
-
Lowell 150LVCS 150W 25/70/100V 2-Gang Volume Control - Stainless Steel
The Lowell 150LVCS stereo autoformer attenuator volume control is engineered for three types of 70V/100V applications—distributed mono systems, distributed mono systems with subwoofer and distributed stereo systems. The VCs in the 150LVCS wall-mount series include a two-gang stainless steel wall plate.
List $169.38Price $160.99 -
Lowell 150LVCS-DSB 150W 25/70/100V 2-Gang Volume Control with Decora Plate - Stainless Steel and Black
The Lowell 150LVCS-DSB stereo autoformer attenuator volume control is engineered for three types of 70V/100V applications—distributed mono systems, distributed mono systems with subwoofer and distributed stereo systems. The VCs in the 150LVCS wall-mount series include a two-gang stainless steel wall plate.
List $176.76Price $167.99 -
Atlas Sound Atmosphere A-RCA Remote RCA/3.5 mm Audio Input
The Atlas Sound Atmosphere A-RCA is a remote RCA/3.5 mm audio input to an Atmosphere AZM audio processor. This expansion acts identically to the on-board RCA inputs. The AZM will automatically detect the A-RCA and dynamically assign appropriate audio settings, such as makeup gain, EQ, and auto gain control, to that input. The stereo inputs are summed to a mono signal before being sent to the AZM. -
Ashly Audio WR-5 Programmable Multi-Function Decora Wall Remote
Control your system from any location with the Ashly WR-5 Programmable Multi-Function Decora Wall Remote Control. This device fits in standard wall boxes and uses low gauge wire for hook-up. WR-5 is a programmable remote button controller for Ashly amps and processors that have a serial data connector.
List $299.00Price $249.00Savings $50.00 (17%) -
ProCo iPlate Portable Audio Player Interface
The ProCo iPlate Portable Audio Player Interface is a device that allows simple and reliable connection of the stereo headphone output of audio devices such as MP3 players, Apple iPods, laptop computers and consumer-type CD and DVD players to the balanced microphone inputs of audio mixing consoles.
-
SoundTube WLL-RX1P-II Tri-Band Uncompressed Wireless Receiver Amp Unit
The SoundTube WLL-RX1P-II wireless receiver unit contains a 2-channel 50W/ch Class D amplifier which will power up to two speakers. An additional 5 receivers (for a total of 6) may be ordered to accompany a single transmitter. -
TOA NM-01 Noise and Sound Masking Generator Module
The TOA Electronics NM-01 is a noise and sound masking module to be used in conjunction with TOA's 9000M2, 900, 700 and BG-2000 series amplifiers.
-
Ashly Audio RW-8C 8-Channel Wall-Mounted Remote Fader Level Control Console
Control your system from any location with this wall-mountable RRW-8C wall-mountable programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector.
List $499.00Price $399.00Savings $100.00 (20%) -
OWI MC4 Four-Channel Audio Control Mixer
The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.
-
OWI MC4-BT Bluetooth Media Control Mixer
The OWI MC4-BT is a Mic/Line audio mixer with a localized Bluetooth receiver and a manual volume control of Bluetooth signal.
-
Ashly Audio FR-8 8-Channel Remote Level Control
The Ashly FR-8 8-channel DSP network remote fader is a great choice for facilities that use amateur operators for occasional live performances. Mix and match network remotes in a single installation via a standard Cat-5 cable.
List $849.00Price $699.00Savings $150.00 (18%) -
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Speco Technologies AA1 a-Live 2 x 80W Wireless Stereo Distribution Amplifier with Streaming Capability
The Speco Technologies a-Live AA1 is a 2-channel amplifier with built-in streaming capability. This unit is ideal in rooms where you only need a couple of speakers.
-
Ashly Audio FR-16 16-Channel Remote Level Control
The Ashly FR-16 16-channel network remote fader is a great choice for facilities that use amateur operators for occasional live performances. Mix and match network remotes in a single installation via a standard Cat-5 cable.
List $1,049.00Price $849.00Savings $200.00 (19%) -
Atlas Sound IED1522LR Dual Logic Input and Dual Relay Output IO Module
The Atlas Sound IED1522LR Logic / Relay Module is a cost-effective interface module that operates as an integral part of an IED GLOBALCOM® system, as a web-enabled, programmable relay device for a wide variety of remote control and automation applications.
List $1,224.99Price $981.99Savings $243.00 (20%)