Commercial Sound Accessories

The ProCo AVP1VSTS is a dual-gang wall plate mounted interface device that allows the line-level outputs of audio and videotape/cassette recorders, phonographs, etc. to be connected to microphone inputs of house P.A. systems.

The Bose CVT-MA12EX is for use with either one or two MA12EX loudspeakers. Bracket included for coupling transformer to loudspeakers.

The Bose CVT-MA12EX is for use with either one or two MA12EX loudspeakers. Bracket included for coupling transformer to loudspeakers.

The TOA D-971E Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors.

The TOA D-971M Line Output Module is a 4-channel module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors.

The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.

The TOA Electronics NM-01 is a noise and sound masking module to be used in conjunction with TOA's 9000M2, 900, 700 and BG-2000 series amplifiers.

Control your system from any location with this wall-mountable RRW-8C wall-mountable programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector.

The Cambridge Sound PM‑W pendant mount housing offers an elegant and sturdy suspension solution for Qt Active and Standard Emitters in open or raised ceiling spaces. Finished in white and equipped with a 20 ft (6 m) cable, it suspends emitters at the optimal height for maximum sound coverage. Compatible with standard 4" octagonal junction boxes and optionally adaptable to ¾" conduit.

Speakers Not Included.

Add to Cart for Details

The OWI MC4-BT is a Mic/Line audio mixer with a localized Bluetooth receiver and a manual volume control of Bluetooth signal.

The ProCo AODDP-4XF wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.

The custom engineered Tannoy CMS 1201 back-can is a powder coated steel back-can that has been designed to cater for all conceivable installation possibilities for the CMS 1201 series making the CMS 1201 extremely versatile.

The ProCo AODDP-2XF2XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.

The ProCo AODDP-4XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.

The Atlas Sound BBWP-S4B BlueBridge DSP Wall Controller is part of the BlueBridge family of DSP products. The BBWP-S4B works in conjunction with any BlueBridge audio processor and is a four-button controller that can be used to change any four preset selections.

The Atlas Sound BBWP-K1B Wall Controller is part of the BlueBridge family of DSP products. It works in conjunction with any BlueBridge audio processor and allows control of any single value change preset by the integrator including gain, threshold, and frequency adjustment.