Commercial Sound Accessories
-
The JBL CSR-3SV is a Remote Control for audio speakers that can use analog DC voltage to provide logic control ranging from source selection and volume for up to 3 sources. Learn More -
List $129.00Price $105.00Savings $24.00 (19%)The TOA U-43R Unbalanced Line Input with High/Low Cut Filters and Mute-Send is an AUX module with voice-activated muting control output. Has dual RCA jacks with passive summing, gain control and Mute send sensitivity. Learn More -
List $129.00Price $105.00Savings $24.00 (19%)The TOA U-43S Unbalanced Line Input with High/Low Cut Filters and Mute-Send is an AUX module with voice-activated muting control output, Mute send sensitivity, High and Low Cut Filters, gain control, and removable terminal block connector. Learn More -
The JBL MTC - 28UB -1 brackets mount JBL Control Contractor surface- mount loudspeaker to walls, decks and ceilings and provide swiveling capability.
Learn More -
List $130.00Price $105.00Savings $25.00 (19%)The TOA S-02S T Buzzer/Yelp Tone Generator module generates buzzer and yelp tones via switch-closure with a removable terminal block connector, and gain control.
Learn More -
List $127.99Price $106.99Savings $21.00 (16%)The Atlas Sound HT327 High Power Transformer features high power handling with minimal insertion loss and wide frequency response to provide quality line matching of loudspeakers in high power systems.
Learn More -
List $134.00Price $108.00Savings $26.00 (19%)The TOA Switchable Mic/Line Input with Mute-Send/Receive function is a balanced mic/line level input with Mute-Send and Mute-Receive functions, phantom power, and removable terminal block connector.
Learn More -
Bose Professional FreeSpace 3BF Bass Loudspeaker Rough-In Kit, 6-Pack (Discontinued - Limited Stock)
Bose FreeSpace 3BF Bass Loudspeaker Rough-In Kit for flush-mount bass module, supports installation in hard deck ceilings.
Learn More -
The Bose EdgeMax Tile accessory is a ceiling tile replacement for use with the EdgeMax EM90 and EM180 loudspeakers, eliminating the need to cut existing ceiling tiles. Simply remove the existing ceiling tile, and use the EdgeMax Tile accessory in its place along with the adjustable tile bridge supplied with the loudspeaker. Learn More -
List $136.00Price $110.00Savings $26.00 (19%)TOA B-11S is for balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Transformer isolation minimizes ground loop problems when connecting remote equipment. Responds to mute bus activation. Learn More -
List $136.00Price $110.00Savings $26.00 (19%)The TOA B-41S balanced line input module with mute-send is a line module to be used in conjunction with the 900 series and AX-1000. It has a voice-activated muting control output and a balanced input. Transformer isolation minimizes ground loop problems when connecting remote equipment.
Learn More -
List $140.00Price $113.00Savings $27.00 (19%)The MT-S0301 Matching Transformer is designed to be installed in the Line Array Speaker.
Learn More -
List $140.00Price $113.00Savings $27.00 (19%)The TOA B-01F is for balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Learn More -
List $140.00Price $113.00Savings $27.00 (19%)TOA L-11S is a balanced line matching input with terminal block connector. For applications requiring 600 ohm line-matching. Responds to mute bus activation. Learn More -
List $140.00Price $113.00Savings $27.00 (19%)The TOA U-21S Unbalanced Line Input with Remote Volume Control has an unbalanced input with screw terminals, remote volume control function, and gain control. For unbalanced, line level equipment such as AM/FM tuners and CD players. Learn More -
List $140.00Price $113.00Savings $27.00 (19%)TOA M-01P is for balanced, low impedance microphones. Control phantom power. Phone Jack Connector. Learn More -
The DBX ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products.
Learn More -
List $144.00Price $117.00Savings $27.00 (19%)The TOA AD-246 AC Power Supply for use with the NX-100, EV-20R, and PM-20EV devices. Converts 120 VAC to 24 VDC.
Learn More -
List $144.00Price $117.00Savings $27.00 (19%)TOA L-01F is a balanced line matching input with XLR-F connector type. For applications requiring 600 ohm line-matching. Learn More -
The AtlasIED IP-SEST-SD is a straight surface mount enclosure is designed for use only with AtlasIED speaker system models IP-SDM, IP-SDMF, IP-SDH, and IP-SDMFLED. The unit provides an architecturally pleasing appearance with crisp lines that blend well with most building interiors.
Learn More -
List $149.00Price $119.00Savings $30.00 (20%)The Ashly WR-1 is an assignable, dual potentiometer remote volume control for the controlled product. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock connector labeled "0 - 5 Volt Remote Level Control".
Learn More -
The Tannoy CMS 503 PI back can is a low profile acoustically enhanced zinc plated steel back can for CMS 503 PI series ceiling speakers. The back can is designed for pre-installation in newly constructed non-suspended ceilings.
Learn More -
List $119.95Price $119.00A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM2S and DM3SE surface-mount loudspeakers. Learn More -
List $119.95Price $119.00A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM2S and DM3SE surface-mount loudspeakers. Learn More
