Commercial Sound Accessories
-
The TOA WP-700-AM is a wall remote control panel, designed to remotely control MA-725F (or MM-700F) matrix mixer amplifiers.
Learn More -
List $115.00Price $92.00Savings $23.00 (20%)The TOA ZM-9001 is a remote control switch panel used with the 9000 Series amplifiers. It adds 6 control inputs and can be mounted in a 1-gang electrical box. Learn More -
List $115.00Price $92.00Savings $23.00 (20%)The TOA ZM-9002 is a remote control switch/volume panel used with the 9000 Series amplifiers. It adds 4 control inputs and 1 volume control and can be mounted in a 1-gang electrical box. Learn More -
List $113.98Price $93.98Savings $20.00 (18%)The Atlas Sound FAP62-TR New Construction Rings provide a marked location for drywall installers to cut around, essentially reserving the desired location in the ceiling until final installation of the Atlas Sound FAP62T loudspeaker.
Learn More -
List $114.99Price $93.99Savings $21.00 (18%)The Atlas Sound E408-250 is specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. It employs a ten-position, non-shorting rotary switch without stop. The attenuation rate is 1.5dB per step. (All other specifications are the same as the AT Series including the UL listing.)
Learn More -
List $117.99Price $96.99Savings $21.00 (18%)The Atlas Sound 164-12A 12 inch Deluxe Steel Wall or Ceiling Baffle features an attractive beveled edge baffles and a square loudspeaker cutout. A separate loudspeaker mounting plate provides for an extended bass response.
Learn More -
List $113.00Price $97.63Savings $15.37 (14%)Allows you to install an LC1 or LBC3951 series ceiling loudspeaker in a drop-in tile ceiling. The bridge consists of 2 rails and spreads the weight of the speaker for safe installation.
Learn More -
List $117.98Price $97.98Savings $20.00 (17%)The Atlas Sound FAP82-TR new construction rings provide a marked location for drywall installers to cut around essentially reserving the desired location in the ceiling until final installation of FAP82T loudspeakers and the FAPSUB-1 subwoofers.
Learn More -
List $112.32Price $98.84Savings $13.48 (12%)The Lowell KL100-DSW 100W mono autoformer attenuator-style volume control with key switch and one-gang wall plate. Patented design secures volume settings for critical paging and emergency systems. For single or multiple speaker lines. Learn More -
List $149.00Price $99.00Savings $50.00 (34%)The Rolls DB228 Wall Direct Interface is an ideal impedance matching device for connecting any unbalanced stereo signal to a balanced system. Consumer audio equipment such as CD players, DVD players, MP3 players, phone, etc. may be easily connected to a professional audio system.
Learn More -
List $109.00Price $99.00The Bose ControlCenter CV41 converter simplifies wiring when using multiple ControlCenter CC-1 zone controllers with a PS602 or PS604 PowerShare adaptable power amplifier. The CV41 converter supports up to four CC-1 controllers allowing each CC-1 to homerun to the amplifier.
Learn More -
List $122.99Price $99.99Savings $23.00 (19%)The Atlas Sound VP161A-APF recessed vandal proof baffle for APF loudspeakers features security for a variety re-entrant horn loudspeakers. It is manufactured from special self-aging aluminum alloy with a tensile strength of 44,000 P.S.I.
Learn More -
The JBL CSS-BB4x6 is a pre-install backcan for use with JBL CSS8004 speakers. For suspended ceilings, tile rail is CSS-TR4/8. Comes in a pack of 6 pcs, for 6 speakers.
Learn More -
The DBX ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePRO products.
Learn More -
List $122.00Price $100.00Savings $22.00 (18%)TOA U-12S is an unbalanced line input with variable mute-receive depth. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Responds to mute bus activation. Adjustable depth provides "ducking". Learn More -
List $122.00Price $100.00Savings $22.00 (18%)TOA M-01S is for Balanced, Low Impedance Microphones. - High and Low Cut Filters for tone control, 4.2k Hz and 330 Hz, 6 dB/octave. - Phantom Power, +22V DC for condenser-type microphones. Active by default, cut Jumper J1 to disable. - Connector: removable terminal block. Learn More -
List $134.60Price $100.95Savings $33.65 (25%)The TX-8A is the ideal choice in many applications requiring superior quality transformer coupling between the output of a 4 or 8 Ohm power amplifier and the input of an audio mixer or amplifier. A front-panel LEVEL control allows the output to be adjusted for -10 dBV or +4 dBu over a wide range of amplified power levels.
Learn More -
List $125.00Price $102.00Savings $23.00 (18%)The TOA U-13S is an unbalanced line input with high/low cut filters, removable terminal block and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Responds to mute bus activation. Learn More -
List $125.00Price $102.00Savings $23.00 (18%)The TOA U-13R is an unbalanced line input with high/low cut filters, Dual RCA connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Responds to mute bus activation. Learn More -
List $128.99Price $103.99Savings $25.00 (19%)The AtlasIED DMA-VS is a wall-mounted remote volume control and source selector for DMA and LMA amplifiers, combining level adjustment and source selection in a single plate with CAT5/6 connectivity, LED indicators, and support for distances up to 100 meters. Learn More -
The Biamp TCM-X-DK is a drywall kit designed for securely installing black Parlé TCM-X ceiling microphones, ensuring a clean, flush-mounted, and professional finish in ceiling applications. Learn More -
The Biamp TCM-X-DK is a drywall kit designed for securely installing white Parlé TCM-X ceiling microphones, ensuring a clean, flush-mounted, and professional finish in ceiling applications. Learn More -
The JBL MTC-8128C C-Rings are integral clips for the MTC-RAIL that spread ceiling loading. There are four pieces per carton.
Learn More -
The JBL CSR-2SV is a Remote Control for audio speakers that can use analog DC voltage to provide logic control ranging from source selection and volume for up to 2 sources. Learn More
