Commercial Sound Accessories

The 510-4 4 inch Cylindrical Bidirectional Baffle Enclosures are identical to the 410 series with the addition of a circular mounting canopy complete with mounting hardware and second grille to enable bi-directional sound dispersion. The 510-4 mounts a...

JY Sound S1460 AC Power Supply Adapter/Recharger The S1460 is an AC power supply adapter/recharger that delivers dependable power for S805A and SW805A amplifiers. Designed for international use, it operates on 110 - 240V at 50/60Hz, offering...

The Atlas Sound SIR Surface Indoor Enclosure is a back box for SVT Series models and it mounts to any single or double-gang backbox for concealed conduit applications. CRS unit includes 0.5" conduit knockouts (three on each side; five on rear) with...

The SIN is a surface-mounting indoor back box for SVT Series models mounts to any single or double-gang back box for concealed conduit applications. CRS unit includes 0.5" conduit knockouts (three on each side; five on rear) and the Epoxy-finished...

Surface-mounting SER exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 0.5" conduit and includes a weatherproof gasket. Housing is die-cast zinc finished in a red durable epoxy

Surface-mounting exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 1/2" conduit and includes a weatherproof gasket. Housing is die-cast zinc finished in a durable Neutral Gray epoxy.

The 81-8S 8" square hole T-Bar bridge is designed to mount 8" loudspeakers. It has a square cut-out with a multi-position hole pattern to accommodate an extensive variety of round and square baffles including torsion spring and screw mount models. The...

The FA81-4 4" tile bridge for Strategy Speakers is designed for use with 4" loudspeakers to prevent ceiling tile sag by distributing the loudspeaker assembly weight to the ceiling's support members. The FA81-4 accepts enclosure model series FA95-4,...

The Atlas Sound CX188329 is a bracket which allows the HT167 transformer to be mounted to the back of the C803 speaker.

Furman F1500-UPS - 1500VA, 2RU Uninterruptible Power Supply and Voltage Regulator Uninterruptible power supply - battery backup / power conditioner. 2RU, AVR, RS-232 and USB Interface; BlueBOLT compatible.The Furman F1500-UPS battery backup is designed...

The ERD-8x series is a round, steel loudspeaker back box. The finish is a white baked epoxy hybrid. The back box is intended for indoor and sheltered outdoor applications.

The Quam QC10 Attenuator Series is a single gang, continuous rotary, ten-step audio level attenuator with an OFF position. The finishes vary with the model. Refer to the technical specification. The knobs are black with white indicators.

The universal MultiMount speaker mount supports loudspeakers weighing up to 60 lbs/27 kgs, quickly attaching them to walls, ceilings, overhangs, and other structural surfaces. Speakers can be aimed and locked in almost any direction or angle through the...

The BSS Audio BLU-8v2 is a HiQnet compatible programmable zone controller capable of controlling a single zone, four zones or eight zones in different modes of operation. A simple control surface and informative visual feedback ensure that non-technical...

RDL TX-70A 25/70V/100V Speaker Level Input Interface The RDL TX-70A is a high-quality speaker-level input interface designed to seamlessly match 25V, 70V, or 100V distributed speaker lines to any unbalanced line-level audio input. Ideal for...

Bose FreeSpace 3BF Bass Loudspeaker Tile Bridge is designed for mounting FreeSpace 3BF bass loudspeaker in hung tile ceilings.

The STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed. The low-cost STP-1 eliminates the costly labor of figuring and assembling fixed pads. Multi-turn trimmers in the STP-1 permit...

This Bose FreeSpace® Rack Mount Kit allows one or two FreeSpace IZA or ZA zone amplifiers to be mounted into a 1 RU rack space. Comes with 2 link brackets and rack ears.

The TSD-PS24V2500MA is power supply. 2500MA Power supply for use with Atlas Sound TSD Modules.

The PS-24AS is a 24 VDC switching power supply, North American AC plug, 500 mA, dc Plug.