- Description
Details
Bose PowerMatch AmpLink 24-Channel Input Card
The Bose® AmpLink input card for PowerMatch® configurable professional power amplifiers installs into the digital expansion slot to receive 24 digital audio channels from a Bose DSP via a shielded CAT 5 cable. Each card includes a THRU connection for daisy-chaining multiple AmpLink amplifiers.
Applications
The PowerMatch AmpLink card enables PowerMatch amplifiers to receive 24-channels of digital audio sourced from a ControlSpace® processor or through an upstream amplifier’s AmpLink thru connection.
These cards allow for simplified audio distribution when devices are co-located in the same equipment rack, or in the same room. Designed for a wide range of applications, including:
- Performing arts venues
- Hotels and conferencing facilities
- Religious and worship facilities
- Health clubs
- Retail and shopping centers
- Sports venues
- Schools and universities
- Features
Features
- AmpLink 24-channel digital audio transport
- Quick-connect RJ-45 connections on shielded CAT 5 cable
- Thru connection to daisy-chain up to 10 m between products
- 3-position bank select switch chooses 8 consecutive AmpLink channels the amplifier will amplify
- Each daisy-chained amplifier can choose either the same, or a different, bank of channels
- AmpLink can daisy-chain up to 8 amplifiers
- Any combination of AmpLink amplifiers can be daisy-chained
- Specification
Channels Twenty-four (24), Each PowerMatch amplifer must select the bank of 8 consecutive channels the amplifier will amplify from the 3-position slide switch. PM4250/N and PM4500/N must then choose the upper or lower 4 channels of that bank in CSD software Sample Rate / Bit Depth 48 kHz / 24 bit Thru Audio Latency 24 ns Maximum Cable Length 10 meters (33’) between products, shielded cable required Connectors Input, Thru, using RJ-45 jacks on CAT 5 cables Software Application ControlSpace® Designer™ Software v5.0 or later Compatible With PowerMatch PM8500 / PM8500N power amplifier
PowerMatch PM8250 / PM8250N power amplifier
PowerMatch PM4500 / PM4500N power amplifier
PowerMatch PM4250 / PM4250N power amplifierCAT 5 Cable Requirements Shielded cable required, TIA/EIA 568B wiring standard - Documents
- In The Box
In The Box
- (1) Expansion Card
- Installation Guide
- Reviews
Write Your Own Review