Brackets & Mounting Kits
-
List $94.00Price $79.95Savings $14.05 (15%)The Bose Conduit Adapter is designed for suspension of DesignMax pendant loudspeakers from 3/4" conduit, down pipe, or downrod ceiling fan hardware. Learn More -
List $94.00Price $79.95Savings $14.05 (15%)The Bose 852582-0010 pendant suspension cable accessory 2-pack is intended for use with FreeSpace FS2P, DesignMax DM3P, DesignMax DM5P, or DesignMax DM6PE pendant-mount loudspeakers suspended from open ceilings. Learn More -
The Yamaha VCSB-L1 is a bracket for 2-axis adjustment of two vertically linked arrays.
Learn More -
The JBL MTC-210UB-WH U-bracket accessory is designed for use with the JBL Professional Control SB210 subwoofer. The U-Bracket allows installation of the enclosure to flat sturdy surfaces, while enabling an axis of rotation.
Learn More -
A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM2S and DM3SE surface-mount loudspeakers. Learn More -
A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM2S and DM3SE surface-mount loudspeakers. Learn More -
The JBL MTC-210UB U-Bracket accessory is designed for use with the JBL Professional Control SB210 subwoofer. The U-Bracket allows installation of the enclosure to flat sturdy surfaces, while enabling an axis of rotation.
Learn More -
The JBL MTC-210UB-WH U-bracket accessory is designed for use with the JBL Professional Control SB210 subwoofer. The U-Bracket allows installation of the enclosure to flat sturdy surfaces, while enabling an axis of rotation.
Learn More -
The Tannoy Yoke Horizontal VX 12.2 accessory bracket for VX 12.2 loudspeakers offers tilt rotation on the long axis of the speaker for optimal audience coverage.
Learn More -
List $212.49Price $169.99Savings $42.50 (20%)The QSC E12YM is a powder coated steel yoke mount for QSC E112 loudspeakers.
Learn More -
TOA's HY-60D series brackets are used to change the directivity angle mode of the HX-7 Series Speaker System to 60° mode. Three pieces of the HY-60D Series are required to obtain 60° mode of directivity angle.
Learn More -
TOA's HY-60D series brackets are used to change the directivity angle mode of the HX-7 Series Speaker System to 60° mode. Three pieces of the HY-60D Series are required to obtain 60° mode of directivity angle.
Learn More -
The Electro-Voice EVC-UB3-WHT is a mounting bracket designed for use with EVC-1122/V speaker and other Electro-Voice EVC and EVU series speakers, but can also be used with other speakers that have a similar mounting pattern. Learn More -
List $197.00Price $197.00The JBL MTC-24TR trim rings allow the installation of Control Contractor ceiling speakers into existing ceiling speaker cutouts that are larger than the speaker's normal cutout size. The maximum cutout size accommodated depends on the installation configuration.
Learn More -
The TOA HY-MT7 matching transformer adapter is designed to mount the MT-200 matching transformer to the HX-7 Series speaker system. Learn More -
The Electro-Voice MB200W installation kit consists of a U-bracket, two M8 x 1.25 hex-head bolts, four lock washers, two friction pads, and two 3/8-24 hex-head bolts. The kit is designed to accommodate the System 200 installation in a variety of ways.
Learn More -
The Electro-Voice MB200 installation kit consists of a U-bracket, two M8 x 1.25 hex-head bolts, four lock washers, two friction pads, and two 3/8-24 hex-head bolts. The kit is designed to accommodate the System 200 installation in a variety of ways.
Learn More -
The Adaptive Technologies MM-022-BT universal MultiMount speaker mount supports loudspeakers weighing up to 60 lbs/27 kgs, quickly attaching them to walls, ceilings, overhangs, and other structural surfaces. - Speaker not included
Learn More -
The Community IUB1062WRG is a weather-resistant U-Bracket for the IC6-1062 loudspeakers.
Learn More -
The TOA HY-WM7W speaker wall mounting bracket is intended for mounting the HX-7W speaker system to the wall by using in combination with the optional HY-VM7W speaker rigging bracket. Learn More -
The Adaptive Technologies SAS-200-24 is an efficient, load rated universal wall arm system for mounting objects, such as loudspeakers weighing up to 200 lb/91 kg to walls and other vertical structures.
Learn More -
The TOA SR-PB5 wall pan bracket is designed to mount the SR-T5 line array speaker to a wall at a horizontal angle of 5° or 10° left or right. Use it in conjunction with the bracket supplied with the SR-T5. Learn More -
The Adaptive Technologies MultiMount MM-120 indoor speaker wall mount supports speakers from its back panel, weighing up to 120 lbs and is fully adjustable in both pan and tilt aiming. Learn More -
The Community PMB-2RR pole mount bracket is a mounting bracket designed for use with Community Professional Loudspeakers' R-Series and VLF Series subwoofers. This bracket is specifically designed for use with round poles, and is capable of securely mounting a subwoofer to a pole.
Call for Pricing
Learn More
