Inputs Cards & Modules
-
RDL DS-HA1A Format-A Stereo Headphone Amplifier
The RDL DS-HA1A Format-A Stereo Headphone Amplifier is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. Each HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.
List $234.30Price $175.72Savings $58.58 (25%) -
Bose ControlCenter CV41 RJ-45 4-to-1 Converter
Free Shipping!The Bose ControlCenter CV41 converter simplifies wiring when using multiple ControlCenter CC-1 zone controllers with a PS602 or PS604 PowerShare adaptable power amplifier. The CV41 converter supports up to four CC-1 controllers allowing each CC-1 to homerun to the amplifier.
List $116.00Price $89.95Savings $26.05 (22%) -
RDL D-HA1A Format-A Stereo Headphone Amplifier
The D-HA1A is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. D-HA1A receiver stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.List $234.30Price $175.72Savings $58.58 (25%) -
TOA RM-200RJ Terminal Unit
The TOA RM-200RJ is designed to convert the RJ45 connector into a screw terminal block. It is used to connect between a trunk cable (such as CPEV cable) and a feeder cable (such as LAN cable) in wiring a remote microphone. -
BSS Audio BLU-Si BLU Link Card
The BSS Audio BLU-Si BLU link Card, which enables Soundcraft Si Expression, Si Performer & Si Compact mixing consoles to be connected to components equipped with a BLU link interface to provide expanded audio distribution, etc. -
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
NEXO NXAE104 AES/EBU Network Card for NXAMP
The NEXO NXAE104 is a network card for NXAMP amplifiers. The NXAE104 receives 4 audio channels in AES/EBU format.
-
Atlas Sound IPUSBD-8 8-Channel USB Dante Network Audio Device
The Atlas Sound IPUSBD-8 is a Dante™ network audio device providing 8x8 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB via redundant RJ-45 ports.
List $2,014.99Price $1,614.99Savings $400.00 (20%) -
NEXO NXES104 EtherSound Network Card for NXAMP
The NEXO NXES104 is a network card for NXAMP amplifiers. The NXAE104 extracts 4 audio streams (24 bits / 48 KHz) among the 2 x 64 channels of an ES100 EtherSound™ stream.
-
Atlas Sound IED1522AIOLR CobraNet Audio I/O Module with Logic and Relays
The Atlas Sound IED1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The IED1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio.
List $2,488.99Price $1,992.99Savings $496.00 (20%) -
TOA SP-11N SIP Module
The SP-11N AM 900 Series SIP Module is a VoIP phone paging module supported SIP with Auto-answer, can connect with IP network and directly registered as one SIP phone station, and has a VOX mute function.