Inputs Cards & Modules
-
List $234.30Price $175.72Savings $58.58 (25%)The RDL DS-HA1A Format-A Stereo Headphone Amplifier is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. Each HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.
Learn More -
The TOA U-01S is an unbalanced line input with removable terminal block connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players.
Learn More -
The TOA U-11S is an unbalanced line input with mute-receive function, removable terminal block connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Learn More -
List $81.00Price $66.00Savings $15.00 (19%)The TOA U-11R is an unbalanced line input with mute-receive function, RCA pin jack connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players.
Learn More -
List $86.00Price $70.00Savings $16.00 (19%)The TOA U-03S is an AUX module with Removable terminal block connector and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players.
Learn More -
The TOA U-13S is an unbalanced line input with high/low cut filters, removable terminal block and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Responds to mute bus activation. Learn More -
The TOA U-43S Unbalanced Line Input with High/Low Cut Filters and Mute-Send is an AUX module with voice-activated muting control output, Mute send sensitivity, High and Low Cut Filters, gain control, and removable terminal block connector. Learn More -
TOA L-11S is a balanced line matching input with terminal block connector. For applications requiring 600 ohm line-matching. Responds to mute bus activation. Learn More -
List $114.00Price $92.00Savings $22.00 (19%)TOA L-01F is a balanced line matching input with XLR-F connector type. For applications requiring 600 ohm line-matching. Learn More -
TOA M-11S is for balanced, low impedance mics. Responds to mute bus activation, normally-on or normally-off. Learn More -
The TOA Electronics NM-01 is a noise and sound masking module to be used in conjunction with TOA's 9000M2, 900, 700 and BG-2000 series amplifiers.
Learn More -
List $979.99Price $785.99Savings $194.00 (20%)The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
Learn More -
List $1,224.99Price $981.99Savings $243.00 (20%)The Atlas Sound IED1522LR Logic / Relay Module is a cost-effective interface module that operates as an integral part of an IED GLOBALCOM® system, as a web-enabled, programmable relay device for a wide variety of remote control and automation applications.
Learn More -
List $1,297.99Price $1,038.99Savings $259.00 (20%)The Atlas Sound IED1516LI is a network logic input device used to interface with an IED GLOBALCOM® announcement control system. It provides 16 optically-isolated inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.
Learn More -
List $1,297.99Price $1,038.99Savings $259.00 (20%)The Atlas Sound IED1516LI-E is a 16 input expansion module that connects directly to a 1516LI to bring its total input capacity up to 32 inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.
Learn More
