Inputs Cards & Modules
-
List $234.30Price $175.72Savings $58.58 (25%)The RDL DS-HA1A Format-A Stereo Headphone Amplifier is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. Each HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.
Learn More -
List $86.00Price $70.00Savings $16.00 (19%)TOA U-01F is an unbalanced line input with XLR-F connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Learn More -
The Bose ControlCenter CV41 converter simplifies wiring when using multiple ControlCenter CC-1 zone controllers with a PS602 or PS604 PowerShare adaptable power amplifier. The CV41 converter supports up to four CC-1 controllers allowing each CC-1 to homerun to the amplifier.
Learn More -
List $234.30Price $175.72Savings $58.58 (25%)The D-HA1A is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. D-HA1A receiver stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender. Learn More -
The TOA RM-200RJ is designed to convert the RJ45 connector into a screw terminal block. It is used to connect between a trunk cable (such as CPEV cable) and a feeder cable (such as LAN cable) in wiring a remote microphone. Learn More -
The BSS Audio BLU-Si BLU link Card, which enables Soundcraft Si Expression, Si Performer & Si Compact mixing consoles to be connected to components equipped with a BLU link interface to provide expanded audio distribution, etc. Learn More -
List $979.99Price $785.99Savings $194.00 (20%)The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
Learn More -
The NEXO NXAE104 is a network card for NXAMP amplifiers. The NXAE104 receives 4 audio channels in AES/EBU format.
Learn More -
List $2,014.99Price $1,614.99Savings $400.00 (20%)The Atlas Sound IPUSBD-8 is a Dante™ network audio device providing 8x8 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB via redundant RJ-45 ports.
Learn More -
The NEXO NXES104 is a network card for NXAMP amplifiers. The NXAE104 extracts 4 audio streams (24 bits / 48 KHz) among the 2 x 64 channels of an ES100 EtherSound™ stream.
Learn More -
List $2,488.99Price $1,992.99Savings $496.00 (20%)The Atlas Sound IED1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The IED1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio.
Learn More -
List $111.00Price $90.00Savings $21.00 (19%)The TOA B-01F is for balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Learn More -
List $125.00Price $101.00Savings $24.00 (19%)TOA M-01F is for balanced, low impedance microphones. Control phantom power. Female XLR Connector. Learn More -
List $125.00Price $101.00Savings $24.00 (19%)TOA M-01M is for balanced, low impedance microphones. Control phantom power. Male XLR connector. Learn More -
The TOA D-922F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.
Learn More -
The TOA D-921F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.
Learn More -
The TOA D-971E Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors.
Learn More -
The TOA D-971M Line Output Module is a 4-channel module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors.
Learn More -
The SP-11N AM 900 Series SIP Module is a VoIP phone paging module supported SIP with Auto-answer, can connect with IP network and directly registered as one SIP phone station, and has a VOX mute function. Learn More
