Inputs Cards & Modules

The Bogen Communications VAR1 Voice-Activated Relay is a DPDT relay device that is activated when an audio signal is detected at the microphone preamp or at 70V, 25V, or 600-ohm line-level inputs.

The TOA T-02S Unbalanced Line Input with Music-On-Hold Output is a line input module for feeding remote equipment such as mixers, amps, tape recorders, and telephone system with Music-On-Hold inputs.

The TOA T-12S is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a balanced line output, as well as an input that can control muting operations of a signal output.

The RDL ST-MX3 is a line-level mixer module in the STICK-ON Series of products. It provides audio mixing of three line-level inputs with individual input gain adjustments.

The MIPRO MRM-70B is a 16-channel single receiver module, and features advanced diversity technology for optimum reception quality, one-touch scan for one of the 16 clear, interference-free frequencies, and has Dual "PiloTone & NoiseLock" circuits that minimize interference.

The TOA D-922E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The TOA Electronics NM-01 is a noise and sound masking module to be used in conjunction with TOA's 9000M2, 900, 700 and BG-2000 series amplifiers.

The NEXO NXAE104 is a network card for NXAMP amplifiers. The NXAE104 receives 4 audio channels in AES/EBU format.

The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.

The Atlas Sound IED1522LR Logic / Relay Module is a cost-effective interface module that operates as an integral part of an IED GLOBALCOM® system, as a web-enabled, programmable relay device for a wide variety of remote control and automation applications.

The Atlas Sound IED1516LI is a network logic input device used to interface with an IED GLOBALCOM® announcement control system. It provides 16 optically-isolated inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.

The Atlas Sound IED1516LI-E is a 16 input expansion module that connects directly to a 1516LI to bring its total input capacity up to 32 inputs that can be driven using dry contact closures or 0 to 50VDC logic signals.

The Atlas Sound IPUSBD-8 is a Dante™ network audio device providing 8x8 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB via redundant RJ-45 ports.

The Atlas Sound IED1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The IED1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio.