Inputs Cards & Modules
-
TOA M-01S is for Balanced, Low Impedance Microphones. - High and Low Cut Filters for tone control, 4.2k Hz and 330 Hz, 6 dB/octave. - Phantom Power, +22V DC for condenser-type microphones. Active by default, cut Jumper J1 to disable. - Connector: removable terminal block. Learn More -
The TOA U-13R is an unbalanced line input with high/low cut filters, Dual RCA connector, and gain control. For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Responds to mute bus activation. Learn More -
List $102.60Price $82.90Savings $19.70 (19%)The TOA Switchable Mic/Line Input with Mute-Send/Receive function is a balanced mic/line level input with Mute-Send and Mute-Receive functions, phantom power, and removable terminal block connector.
Learn More -
List $104.90Price $84.80Savings $20.10 (19%)The TOA B-41S balanced line input module with mute-send is a line module to be used in conjunction with the 900 series and AX-1000. It has a voice-activated muting control output and a balanced input. Transformer isolation minimizes ground loop problems when connecting remote equipment.
Learn More -
List $107.10Price $86.50Savings $20.60 (19%)The TOA B-01F is for balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Learn More -
List $120.60Price $97.50Savings $23.10 (19%)TOA M-01F is for balanced, low impedance microphones. Control phantom power. Female XLR Connector. Learn More -
List $120.60Price $97.50Savings $23.10 (19%)TOA M-01M is for balanced, low impedance microphones. Control phantom power. Male XLR connector. Learn More -
For applications requiring 600 ohm line matching, the TOA L-41S T transformer isolation (600 ohms) minimizes ground loop problems when connecting remote equipment (greater than 15 feet). Learn More -
The TOA T-01S Balanced Line Output is for transformer-isolated output of mixing bus signal to feed other mixers, amps, and tape recorders. Includes balanced line output with removable terminal block and gain control.
Learn More -
List $134.00Price $108.30Savings $25.70 (19%)The TOA S-04S T switch-selectable tone generator generates one of four tones via switch-closure. Can be used for doorbell, paging, door/gate release, telephone night ringer, annunciator, class change or pre-announcement tone.
Learn More -
The TOA U-61S Unbalanced Line Input with Compressor is a line input module. It has unbalanced line input with removable terminal block connector, compressor function, gain control, and configurable as master compressor. Learn More -
List $180.80Price $146.10Savings $34.70 (19%)The TOA 9000 series digital mixer/amplifiers consists of two mixer/amplifier models (A-9060D and A-9120D) a mixer-only version, (M-9000) and four accessory modules, for which all models feature eight module ports allowing designers to configure custom systems.
Learn More -
The TOA D-922F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.
Learn More -
The TOA D-001R Line Input Module is a plug-in module designed for use with the 9000 Series. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.
Learn More -
The TOA D-001T Dual Line Input Module is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60 dB to -10 dB.
Learn More -
The TOA D-981 Remote Control Module is a remote control module designed for use with the D-901 Digital Mixer, etc. It permits preset memory recall, input/output channel volume control, stereo input selection and channel ON/OFF operation to be remotely controlled from external equipment. Learn More -
The TOA D-971R Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with standard RCA pin jacks.
Learn More -
The TOA D-921E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.
Learn More -
The TOA D-921F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.
Learn More -
The TOA D-971E Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors.
Learn More -
The TOA D-971M Line Output Module is a 4-channel module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors.
Learn More -
The RC-001T is an interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up to 16 remote control panels can be connected to the RC-001T. Learn More -
The SP-11N AM 900 Series SIP Module is a VoIP phone paging module supported SIP with Auto-answer, can connect with IP network and directly registered as one SIP phone station, and has a VOX mute function. Learn More
