- Description
Details
The AVP1V is a dual-gang wall plate mounted interface device that allows the line-level outputs of audio and videotape/cassette recorders, phonographs, etc. to be connected to microphone inputs of house P.A. systems. It has the added feature of a 10kW linear input level control and is available on a brushed stainless steel or black anodized aluminum wall plate.
- Features
Features
- Speaker Input - 1/4" 3-conductor phone jack, wired for use with standard 2-conductor plug, accepts signals from unbalanced line level or speaker-level sources such as phonographs, audio and video tape recorders and movie projectors. Has 16-ohm, 5-watt dummy load, 20 dB attenuator network, and low-pass filter (-3 dB @ 8 kHz, 6 dB/octave). Input impedance: approx. 16 ohm.
- LINE INPUT L/R - RCA phono jacks, resistively mixed to monaural, for signals from nominal -10 dBV sources such as radio, cassette or VCR outputs. Input impedance: approx. 4 kohm.
- MIC INPUT - Female 3-pin XLR-type connector provides independent microphone input (brought out to output barrier strip) for announcer, lecturer, etc.
- HUM CANCEL - Ground-lift switch, used to reduce hum and buzz by eliminating ground loops and providing proper grounding for various conditions. Breaks connection between input and output shields.
- Specification
Input Impedance >130 kOhm @1kHz (line in L/R jacks, mono source)
4.0 kOhm (line in L/R jacks, stereo source, resistively mixed)
16 Ohms (PROJ IN jack)Output Impedance <200 ohms @1kHz Frequency Response 20 Hz - 20 kHz, +/-.5dB @-15dBv output
-3dB @85 kHz
6dB/octave attenuation above 8 kHz (PROJ IN jack)Input Connectors 2 x RCA Phono Line In
1 x 3-pin XLR Female Mic
In 1 x 1/4" TS Phone PROJ IN(SPKR)Output Connector Barrier Strip Dimensions (H x W x D) 4.6" (115.8 mm) x 4.6" (115.8 mm) x 1.25" (31.75 mm) Weight 0.41 lbs (0.184 kg) - Reviews
Write Your Own Review