- Description
Details
SoundTube WLL-RX1P-II Tri-Band Uncompressed Wireless Receiver System
The WLL-RX1P-II wireless receiver unit contains a 2-channel 50W/ch Class D amplifier which will power up to two speakers. An additional 5 receivers (for a total of 6) may be ordered to accompany a single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 18 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. Receiver output options include Push-On phoenix connectors or 1/4" connections. The WLL-RX1P also includes stereo line output for connecting auxiliary audio components. A Local Audio source may also be used at the receiver via stereo mini which mutes the wireless signal when connected.
- Features
Features
- 3 RF channels to minimize interference from other devices
- Each band contains 3 channels, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20 ms
- Uncompressed 2-channel audio for maximum fidelity
- Multiple receiver/amplifier units may be used with a single transmitter
- Up to 6 receivers may be used for each transmitter. For more than 6, use an additional transmitter on another frequency
- USB, stereo mini or 1/4" balanced input connections at the transmitter
- Push-On or 1/4" connections speaker level outputs at the receiver. Also includes stereo line output for connecting auxiliary audio components, such as ADA (Americans with Disabilities Act) adapters
- Local Audio source at the receiver via stereo mini (mutes the wireless signal when connected)
- High/Low power selector switch on transmitter limits RF range where needed
- Specification
RF Band 2.4 GHz, 5.2 GHz, 5.8 GHz Amplifier Output Power 50W/Ch @ 8 Ω, 65W/Ch @ 4 Ω, Bridged Mono 90W @ 4 Ω Operating Range (Full Power) 210 ft. line of sight Operating Range (Low Power) 70 ft. line of sight Audio Frequency Response 20 Hz - 20 kHz Modulation Digital Dynamic Range 90 dB Antenna Impedance 50 ohm Power Supply/Requirements 32V, 4.0 A Housing Material Powder coated metal Dimensions (H x W x D) 1.75" (44.45 mm) x 6.18" (156.97 mm) x 6.5" (165.1 mm) Weight 1.85 lbs (0.84 kg) - Documents
Documents
- Reviews
Write Your Own Review