Conference Room System Components

The Audio Enhancement WPA-501 is a wall plate that expands the communication between classrooms and the office. These wall plates are easy to connect and install, saving time and money.

The Audio Enhancement WPA-505 is a wall plate that expands the communication between classrooms and the office. This wall plate is easy to connect and install, saving time and money. It is equipped with an Emergency button and ambient microphone.

The Audio Enhancement WPA-504 expands communication between classrooms and the office through a call button and an ambient microphone. This wall plate is easy to connect and install, saving time and money.

The Audio-Technica ATUC-50IU is microprocessor for custom designed flush mount conference units for the ATUC-50 system. It can be placed anywhere in same chain/loop with other ATUC-50 units, where the architecture of the system requires seamless, hidden installation of the microprocessor.

The Yamaha PGX1 is a paging station extension that can be used with the PGM1.

The ATND8734a is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable.

The Yamaha MCP1 is an advanced wall-mount control panel for controlling MTX and MRX systems.

The Biamp Devio SCR-10 provides users with exceptional AV experiences when using conferencing systems. Intended for huddle rooms or small conference rooms, the Devio SCR-10 is a BYOD approach that supports a variety of room designs for computer-based conferencing.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The Biamp Tesira HD-1 is a hardware dialer for Tesira server-class devices. The HD-1 is compatible with Tesira SERVER and SERVER-IO with STC-2 or SVC-2 cards installed, as well as all versions of the TesiraFORTÉ VT and TesiraFORTÉ VT4.

The Shure MXCWNCS networked charging station charges 10 SB930 batteries in 4 hours.

The Roland XS-42H is the switcher anyone can connect to and immediately start sharing information to one or two screens for effective meetings and huddles. It is easily installed without any AV experience turns any flat panel TV into a meeting room system.

The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.

The Bosch PRS‑1AIP1 is a universal, IP‑based audio device supporting VoIP and Audio over IP applications. It is an ideal solution for bridging audio and contact closures over long distance LAN and WAN networks, e.g. in shopping malls, tunnels, in and between railway stations.

The Audio-Technica ATUC-IRCU rack-mountable infrared control unit drives wireless or wired-wireless hybrid systems. It can power and control a total of 200 ATUC-IRDU infrared discussion units and 100 ATUC-50DU/IU/INT wired units