Conference Room System Components

The Audio-Technica ATUC-50IU is microprocessor for custom designed flush mount conference units for the ATUC-50 system. It can be placed anywhere in same chain/loop with other ATUC-50 units, where the architecture of the system requires seamless, hidden installation of the microprocessor.

The Yamaha PGX1 is a paging station extension that can be used with the PGM1.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.

The Bosch PRS‑1AIP1 is a universal, IP‑based audio device supporting VoIP and Audio over IP applications. It is an ideal solution for bridging audio and contact closures over long distance LAN and WAN networks, e.g. in shopping malls, tunnels, in and between railway stations.

The Control Unit is the main component of the CCS 1000 Digital Discussion System. It supplies DC power to all connected Discussion Devices and monitors and controls the discussion system.

The Shure MXCWAPT access point transceiver manages audio routing, frequency coordination, and system control for up to 125 wireless conference units.

The Audio-Technica ATUC-IRCU rack-mountable infrared control unit drives wireless or wired-wireless hybrid systems. It can power and control a total of 200 ATUC-IRDU infrared discussion units and 100 ATUC-50DU/IU/INT wired units

The Audio-Technica ATUC-IRCUDAN rack-mountable infrared control unit includes all of the features of the ATUC-IRCU, plus Dante™ output with redundancy and drives wireless or wired-wireless hybrid systems. It can power and control a total of 200 ATUC-IRDU infrared discussion units and 100 ATUC-50DU/IU/INT wired units. 

The Atlas IED550CS-H digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems. Each model utilizes an electret condenser cartridge that is positioned in the housing such that its frequency response is enhanced.

The Atlas IPCSDTOUCH-G digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems.

The Atlas Sound IPCSDTOUCH-H digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems.

The Atlas Sound IED550CS-G digital communications station is a fully programmable touch screen user interface device with a gooseneck microphone for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems. It utilizes an electret condenser cartridge that is positioned in the housing such that its frequency response is enhanced.

Optimized for use with the EX-1280C, the Bose EX-UH Dante endpoint, is a convenient, cost effective solution for connecting remote BYOD devices or telephone handsets over a single cat-5/6 cable.

Optimized for use with the EX-1280C, the Bose EX-8ML Dante endpoint, is a convenient, cost effective solution for connecting up to 8 conferencing microphones over a single cat-5/6 cable.