- Description
Details
It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line. Connecting the unit to the LAN permits paging calls through analog subscriber line to be made and the equipment connected to the N-8000MI and N-8000DI to be controlled. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.- Features
Features
- 10/100BaseTX Ethernet network connection.
- Occupies one network node (191 max-at least one node must be a master station or N-8000/8010EX exchange).
- Analog central office line circuit.
- Specification
Power Source (CE) 220 – 240V AC, 50/60Hz/ (CU): 120V AC, 50/60Hz Power Consumption 7W (Max.) Line Specifications Line Public Switched telephone networks Number of Lines 1 line Selective Signal Type DTMF signal Signal System Compatible with loop start signalling Wiring Method 1 pair of twisted pair cables Network Section Specifications Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation)Auto MDI/MDI-X compatible Network Protocol TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP Audio Packet Specifications Transmission System Unicast, Multicast Connector RJ45 connector Indication Network LNK/ACT indication, Status Lamp, Power-on indication lamp,Line in-use lamp Other Firmware update function, System data hold function, Time of day hold facility,Reset switch (FP) Installation Method Rack, Desk, Surface mount Operating Temperature 0°C to +40°C (32°F to 104°F) Operating Humidity 90% RH or less (no condensation) Finish Pre-coated steel plate, black, 30% gloss Dimensions 210 (W) × 44.3 (H) × 267 (D)mm (8.27" × 1.74" × 10.51") Weight 3.75 lbs. (1.7kg ) - Reviews
Write Your Own Review